06 February 2018
Dal Teknik Makina completes upgrade project at Nuh Çimento 06 February 2018
Turkey: Dal Teknik Makina has completed an upgrade project on Kiln Line 1 at Nuh Çimento in Kocaeli. Key features of the project included increasing the line’s production capacity, decreasing its energy requirements, making savings on power consumption and lowering the exit temperature of the clinker. The work has increased the plant’s production capacity to 3400t/day from 2800t/day. Other benefits of the update include decreasing the specific heat consumption of clinker to 740kcal/kg clinker from 870kcal/kg clinker, reducing electrical power consumption by 7kWh/t and increasing the raw mill capacity to 185t/hr from 160t/hr. The exit temperature of clinker was also reduced to 55oC plus the ambient temperature.
This project involved the design, manufacturing and erection of the pre-heater tower cyclones group, kiln feed transport system, clinker cooler, kiln hood, removing of dust cyclone at tertiary air duct, cooler vent fan modification, main bag filter duct modification and kiln inlet seal and commissioning of the system.
The first part of the upgrade project was the modification of the pre-heater tower, which as a result reduced the pressure drop, improved heat transfer and separation efficiency, and heat consumption. The second part of the project was the retrofit of the grate cooler. The clinker cooler, kiln hood, cooler fans and cooler vent fan were replaced by Fons Technology International. In this part, kiln hood, cooler vent, exit pipe of waste heat recovery (WHR) unit and tertiary air duct were modified as well. The third part was to replace the horizontal duct of main bag filter inlet with an inclined one in order to avoid dust accumulation. The last step was the replacement of the pneumatic kiln feed by bucket elevator.
The project followed Dal Teknik Makina’s Filter-To-Filter Pyro-Process Concept.
FLSmidth consortium buys share in Power Cement 06 February 2018
Pakistan: A consortium of investors including Denmark’s FLSmidth have purchased a stake in Power Cement. The investors include the Danish Investment Fund for Under-Developed Countries (IFU) and IFU Investment Partners (IIP). As part of the deal the board of the cement producer has approved the appointment of Anders Paludan as a director.
Fives wins kiln replacement order for Eqiom’s Lumbres cement plant 06 February 2018
France: Fives FCB has been awarded an engineering, equipment supply and supervision of works contract for the replacement of a kiln at the Lumbres cement plant. The work covers replacing the downstream shell of the 42.2m kiln, including the tyre. The project is part of the cement producer’s plan to adapt Kiln 5 at the site for the installation of a new clinker cooler.
Gambarotta receives order from CBMI-Sinoma 06 February 2018
China: Italy’s Gambarotta Gschwendt has received an order from CBMI-Sinoma for four surface feeders and five apron feeders. The company manufactures bulk handling equipment such as elevators and conveyors.
Ivory Coast sets up quality control commission for cement 06 February 2018
Ivory Coast: Jean-Claude Brou, the Minister of Industry and Mines, has announced the creation of a commission for the quality control of cement. The minister made the statement at the opening of a new mill at LafargeHolcim plant at Abidjan, according to the Agence Ivoirienne de Presse. Brou added the country’s demand for cement rose to 5Mt in 2017 from 2.5Mt in 2015.