02 November 2018
Construction works starts on Angren cement plant in Uzbekistan 02 November 2018
Uzbekistan: An event marking the laying of the foundation stone at the Angren cement plant has taken place. Construction work is scheduled to be completed by November 2019. The project is a joint venture between Russia’s Eurocement Group and UzQurilishMateriallari.
Myanmar ministry seeks investors for cement plant in Chin State 02 November 2018
Myanmar: The Ministry of Natural Resources and Environmental Conservation (MNREC) is seeking expressions of interest from foreign and local investors to run a feasibility project ahead of building a new cement plant at Hakha Township in Chin State. Early studies suggest that the area has sufficient limestone reserves to support a 5000t/day plant, according to the Myanmar Times newspaper. A new unit in the region is expected to boost the local economy as Chin State has no cement plants.
Cement Manufacturers Association of Ghana supports new build code 02 November 2018
Ghana: The Cement Manufacturers Association of Ghana (CMAG) has praised the introduction of the country’s first building code. The Building Code for Ghana was launched by Vice President Mahamudu Bawumia in late October 2018, according to the Ghana Multimedia Group. The 1700-page document, in 38 sections, covers all essential areas for the operation of the building and construction industry. The production and launch of the code is intended to end irregularities in the building and construction sector and set standards to ensure that local construction is safe and meets international standards.
“Today is a very significant day in the annals of the history of this country. For the first time ever, through the collaborative efforts of different agencies, Ghana has a comprehensive Building Code. The Ghana Building Code, GS1207 of 2018 is a document that is long overdue but which has finally been delivered,” said Bawumia. He added that the code would reassure people about the risk of collapsing buildings.
Lagan bagged cement products rebrand as Breedon 02 November 2018
Ireland/UK: Lagan Group’s bagged cement, brick and tile products have been rebranded within the Breedon Group. The Irish company was acquired by Breedon Group earlier in 2018. It manufactures a range of bagged cement, concrete roof tiles and clay facing bricks, which it supplies to builders’ merchants across the UK and Ireland. The newly branded range has widened the product range available through Breedon’s distributor network.
As James Cousins, regional director responsible for Breedon’s specialist building products, said, “It’s a very exciting time to be part of Breedon. We’ve spent the last few months getting to know our new colleagues, as well as the products and plants within the group, and the rebranding from Lagan to Breedon demonstrates our commitment to the market to move forward as a single brand, leveraging the strength of the enlarged group to offer our customers high quality products and the highest level of customer service.”
India: Dalmia Bharat’s sales rose but its earnings and profit fell in the half-year to the end of September 2018. Its income increased by 10% year-on-year to US$625m from US$570m and its sales volumes grew by 13% to 8.6Mt from 7.6Mt. However, earnings before interest, taxation, depreciation and amortisation (EBITDA) decreased by 8% to US$126m from US$138m and its profit after tax dropped by over a third to US$7.7m from US$12m.
The cement producer said it had reduced its logistic costs despite an increase in diesel prices. It also reported that its alternative fuels co-processing rate was 5.5% in the second quarter of its 2019 financial year with the company focused on raising this. The board of director also announced that the amalgamation with Odisha Cement had been completed.
Aixergee holds seminar on production optimisation 02 November 2018
Germany: Aixergee has held its annual workshop-seminar on process optimisation for cement producers. The two-day event took place in Aachen in early October 2018. It covered improvements in the cement production process, including production increases, emissions regulations, alternative fuel burning and related topics. Aixergee uses a modelling toolbox from over 200 optimisation projects it has been involved with and a particular focus was on methods such as CFD (computational fluid dynamics), flowsheet simulation and data analysis.