Ternary cements – The future is now!

Print this page

There was fantastic news for fans of novel cements this week, when Cementos Argos announced the completion of work on a new 0.45Mt/yr calcined clay production line at its Rio Claro plant in Colombia. This artificial pozzolanic material, developed and promoted by the Swiss-led LC3 consortium in recent years, can dramatically lower cement CO2 emissions by replacing slag and/or fly ash in cement mixes. The Rio Claro plant is the first major cement plant to install such a line following smaller trials in Switzerland, India and Cuba.

Suitable clays are more widely available than slag and fly ash, alleviating some of the difficulty and cost of obtaining supplementary cementitious materials. They also need to be calcined at just 800°C, offering massive savings in terms of fuel costs, CO2 emissions and embodied energy compared to Ordinary Portland Cement (OPC) production. Karen Scrivener from the École Polytechnique Fédérale de Lausanne (EPFL), the leading academic party in the LC3 consortium, explained that calcined clays are at their best when in ternary (three-way) blends alongside clinker and limestone in the September 2019 issue of Global Cement Magazine. “It has long been known that calcined clays can be pozzolanic,” she explained. “When used alone, the maximum substitution level is around 30%, which gives a moderate saving in CO2 emissions. However, if we substitute a further 15% of the clinker with limestone, we get a significant reduction in CO2 emissions, with a product that has almost identical properties to the blend that contains just the calcined clay.”

While the exact composition of Rio Claro’s new products is unclear, it will enable Cementos Argos to produce ternary cement blends with CO2 emissions 38% lower than OPC. Energy consumption is also cut by 30%, which provides secondary benefits in terms of reduced off-site CO2 emissions. At the plant’s launch, Cementos Argos’ President Juan Esteban Calle clearly stated that calcined clays were the way forward, announcing, “With this project we are sowing the seeds of the Argos of the future. It starts today with a new production line at Rio Claro. In our commitment to climate change, this project makes us very proud.”

The response from Argos’ consumers will be keenly watched, especially in Europe. Just this week LafargeHolcim and Vicat, along with France’s Technical Association of the Hydraulic Binders Industry (ATILH), called on the European Commission and European Committee for Standardisation to hurry up and publish ternary cement standards across the European Union (EU). At the moment these producers are primarily concerned with CEMII / C-M and CEM VI cements. These classes of cement comprise a range of ternary blends that contain clinker and limestone, plus a third component, be it slag, fly ash, natural pozzolans or calcined clay. They claim that placing low-clinker cements on the market could reduce the amount of CO2 emitted by 127kg/t, around 20% of the 656kg/t average in Europe at present.

Frustrated with the delays at Commission level, cement producers have now taken things into their own hands. The plan is to establish the same standard within each EU Member State at the national level, rather than waiting in vain for standards from ‘on high.’ One pressing driver for this behaviour is the rapid approach of the Phase 4 of the EU Emissions Trading Scheme (ETS) in January 2021. In Phase 4 it is likely that EU cement producers will be allocated only 80% of the free allowances they have become accustomed to. They will have to buy the remainder at market prices, currently Euro25.1/t of CO2 (17 February 2020). This will represent a massive new expense for some producers. The opportunity to sell cement that emits only 58% of the CO2 of OPC is clearly exceedingly attractive as a way to reduce outgoings. CO2 emissions will be reduced, of course but, as usual, the way to make companies do things is to hit them in the wallet.

Indeed, on this point, Vicat seemed to almost goad or ‘troll’ its competitors in Europe this week by announcing that it has never sold any EU ETS allowances and is sitting atop a 5Mt CO2 reserve worth Euro120m. This is sufficient to last it until 2030 at current prices. The key part of that last sentence is ‘current prices,’ which are subject to change. In its press release, Vicat was keen to point out that it is not resting on its laurels, highlighted by its advocacy for ternary blends and continued development of alternative fuels. This may be wise, considering that EU ETS allowances will likely cost more once Phase 4 kicks in.

With clinker factors of just 50 - 65% for CEMII / C-M, and 35 - 50% for CEM VI, Edelio Bermejo, director of research and development (R&D) at LafargeHolcim insists, "These cements are no longer at the research and development stage. They have been widely validated and we are ready to produce them, especially as their manufacture does not require modification of our facilities." The establishment of Cementos Argos’ Rio Claro calcined clay plant proves his point. We can expect to hear a lot more about these blends in the coming months. In the words of Bermejo, “The future is here!”

Last modified on 19 February 2020

Register for the Global Cement Weekly email newsletter

Global Cement Weekly is Global Cement’s weekly email newsletter. Keep up to date with cement industry news, analysis, diary dates and news of people in the sector.

Register >

URL: https://www.globalcement.com/news/item/10486-ternary-cements-the-future-is-now

© 2024 Pro Global Media Ltd. All rights reserved.