Displaying items by tag: Global Cement & Concrete Association

The Queensland state government in Australia took a blunt approach to health and safety earlier this month when a report it commissioned said that it expected 12 deaths to occur in the mines and quarries sector over the next five years unless changes were made. This is far removed from the usual news stories that industry magazines like Global Cement and others cover. Typically, these are either plants or companies reaching Lost Time Injury (LTI) milestones or sad (but thankfully rare) reports of death.

The forecast in Queensland was based on a review of fatalities in the sector that the state commissioned from Sean Brady, Department of Natural Resource, Mines and Energy, looking at the years 2000 to 2019. Year-by-year the figures were significantly lower than those occurring in the 1900 to 2000 period but didn’t appear to have any discernable pattern. However, when presented as a 12-month rolling sum of fatalities, a two to three year cycle seemed to occur. Brady then went on to look at how the fatalities happened, how the industry behaved and reacted and what could be done to improve the situation. His recommendations included looking more deeply at the causes of seemingly unrelated accidents and then changing overall organisational behaviour and insight through methods such as adopting principles of High Reliability Organisational theory, simplifying the reporting system and changing the standard safety indicators like LTI.

That last point is interesting given the prevalence of LTI indicators on corporate sustainability reports in the cement industry. The point that Brady cites here is that LTI can become a measure of how well injuries are managed, not how safely an organisation is performing. For example, the definition of what an injury is can be manipulated, leading to distortion, as can workers being brought back to work before they recover or into lighter duties. Instead he recommends that ‘serious accidents’ be used in place of LTI. These are defined as incidents that result in a fatality or incidents where an individual requires admission to hospital for treatment of an injury. The preference here is based on so-called ‘serious accidents’ being unambiguous and transparent because they are defined by a third-party medical practitioner.

Wider critiques of health and safety measurements have identified under-reporting of incidents arising from safety incentive programmes, safety culture, employee perceptions of reporting and workplace bullying. This isn’t to say that the LTI measure is not fit for purpose. It has undoubtedly led to higher safety conditions around the world, with reduced injury and mortality from working conditions, and it allows for comparisons between organisations. Yet, any health and safety metric or indicator could be liable to bias or manipulation either unconsciously or consciously. Serious accidents, for example, could be potentially undermined by an organisation having its own medical centre and would also suffer from different health care systems in different locations. Throw in different legislative frameworks around the world and comparing countries can also start to become confusing.

This tension between data and real-life safety is acknowledged by the Global Cement and Concrete Association (GCCA) in its sustainability guidance from late 2018. It distinguishes between so-called ‘lagging’ indicators, like LTI and fatalities, which show the effectiveness of a safety programme after the fact and the importance of continual safety improvement plans that aim to prevent adverse events before they happen. It is easy to become lost in a dust storm of facts and figures on health and safety but, as the Queensland authorities and the GCCA agree, measuring health and safety is a means to an end. The aim is zero harm to everyone involved.

UK: The Global Cement and Concrete Association (GCCA) has launched ‘Innovandi,’ a research network between industry and scientific institutions. The network intends to research the areas of process technology, including the impact of co-processing, efficiency of clinker production and implementation of CCUS/ technologies, and products. This will include the impact of clinker substitutes and alternative binders in concrete, low carbon concrete technology and improve the understanding of CO₂ reduction through re-carbonation.

“Our industry is fully committed to taking action to reduce CO₂ emissions. As such, Innovandi is an industry led initiative and will bring together the best minds from all corners of the cement and concrete world, academia and business. Together we will truly collaborate on a global scale and use our expertise to find new ways of working and developing effective innovations,” said Benjamin Sporton, the chief executive officer (CEO) of the GCCA.

24 companies from the cement and concrete industry, including cement and concrete manufacturers, admixture specialists and equipment suppliers, have committed to the initiative, with scientific institutions and additional companies set to join as its work begins work. These include Buzzi Unicem, Cementir Holding, Cementos Argos, Cementos Molins, Cementos Pacasmayo, Cemento Progresso, Cemex, CNBM, Chryso, CRH, Dalmia Cement, FLSmidth, Grupo Cementos de Chihuahua (GCC), GCP Applied Technologies, Mapei, HeidelbergCement, LafargeHolcim, Nesher Israel Enterprises, SCG Cement, Titan Cement, Refratechnik Cement, Sika Technology, Subote New Materials and Votorantim.

As part of the new initiative, the GCCA also intends to establish an annual Innovandi global conference to promote collaboration on innovation and research in the sector.

UK: The Global Cement and Concrete Association (GCCA) has launched the GCCA Industry EPD Tool (Version 2.0) to support the publication of environmental product declarations (EPDs) by cement and concrete producers. Originally commissioned by the World Business Council for Sustainable Development Cement Sustainability Initiative, the new GCCA Industry EPD Tool includes the latest database of energy impacts from cement production from across the world, supporting the output of more accurate EPD data. The GCCA is making the tool available to all producers and organisations in the cement and concrete industry to increase availability to designers and clients of EPDs to support the sector deliver a sustainable built environment.

“We are committed to supporting the cement and concrete industry to reduce its environmental impact and support global sustainability goals. With the launch of the new EPD Tool, we are enabling the industry and its customers to better quantify and verify the life cycle environmental impact of existing products and to develop lower-impact products in the future,” said Andrew Minson, GCCA Concrete and Sustainable Construction Director.

The GCCA Industry EPD Tool has been developed by Quantis, verified by Studio Fieschi, and the GCCA says it is the first industry tool in the International EPD System. It is based on internationally recognised standards and product category rules.

Today is the first day of the Global FutureCem Conference taking place in Brussels, Belgium. The event is looking at how the cement industry can adapt to a low or zero carbon world. Although Global Cement is organising the event, it is clearly topical as two news stories this week demonstrate.

Firstly, the chief executive officers (CEO) from 13 US companies, including LarfargeHolcim, announced that they were lobbying the US government to enact business-led climate change legislation. The initiative, known as the CEO Climate Dialogue, included principles such as ‘significantly’ reducing US greenhouse gas emissions. This is shocking because, at face value, large-scale CO₂ emitters like LafargeHolcim have the most to lose from more rigorous environmental regulations. What do they have to gain from doing this? This is like turkeys voting for Christmas!

Interpretations of why LafargeHolcim and others might want to do this could go in a few directions. Firstly, the intention might be fully plausible. These companies could genuinely want to combat climate change. Secondly, more cynically perhaps, leading demands for legislation puts the lobbyists in the room when change is actually made. Given the integral nature of concrete in modern construction this is not necessarily a bad thing. Environmentalists may want to ban building materials that create CO₂ emissions but, until they can offer an alternative or convince people to accept reduced quality of life, then cement is the material of choice. Thirdly, leading change allows one to stay ahead of it or at least give the sector more time to react to it. The ‘turkeys’ may not want to vote for ‘Christmas,’ but perhaps ‘Christmas’ could be replaced with something else?

This latest initiative by the CEOs in the US has parallels with the creation of the Global Cement and Concrete Association (GCCA) in 2018. Like the current moves in the US, cement producers led the creation of the GCCA, to promote concrete as the sustainable building material of choice.

Meanwhile, Germany’s HeidelbergCement also announced this week that its CO₂ reduction targets to 2030 have been assessed against the Science Based Targets initiative’s (SBTi) criteria. Its SBTi target is to reduce scope 1 greenhouse gas (GHG) emissions 15% per ton of cementitious material by 2030 from a 2016 base year. HeidelbergCement has also committed to reduce scope 2 GHG emissions by 65% per ton of cementitious materials within the same timeframe. The SBTi target follows HeidelbergCement’s previous goal of a 30% reduction in its specific net CO₂ emissions by 2030 compared with 1990. It says it has achieved a reduction of 20% so far.

HeidelbergCement is a sustainability leader in the sector with various projects on the go including the Low Emissions Intensity Lime And Cement (LEILAC) consortium direct separation pilot project at the Lixhe cement plant in Belgium. Following SBTi is a continuation of this trend, albeit one that anchors it with a global consensus.

Coincidence perhaps but when the two largest non-Chinese cement producers start announcing sustainability stories like then the picture is changing. The questions at this point is how far will it go.

A full review of the 3rd Global FutureCem Conference will be published after the event. To find it and more information visit: http://www.globalcement.com/conferences/global-future-cement/introduction

UK: The Global Cement and Concrete Association (GCCA) is formally joining the Concrete Sustainability Council (CSC). By doing so it is adding its support to the only world-wide industry specific system that certifies the sustainability performance of concrete plants and their supply chain across the globe. Developed in conjunction with social and environmental stakeholders, the CSC is the industry recognised authentication system, with more than 160 plants certified to its standards across eight different countries.

“We are delighted at the decision of the GCCA to champion the many sustainability benefits of concrete by putting their global reach behind the CSC. We look forward to reinforcing and accelerating our work with their support,” said CSC chairman, Christian Artelt.

Clients, developers and contractors can be assured of socially and environmentally responsible practices through the concrete supply chain when specifying CSC certified concrete. Internationally recognised sustainable project assessment methods such as BREEAM and DGNB credit design teams and their projects with points when CSC certified concrete is specified and procured.

UK: The Global Cement and Concrete Association (GCCA) has expanded its membership to 36 companies with its number of affiliates organisations rising to 15. The new members include Corporacion Moctezuma in Mexico, Unión Andina de Cementos (UNACEM) in Peru, JSW Cement in India and West China Cement in China.

The new affiliates include Oficemen (the Spanish Cement Association), the Cement Manufacturers Association of India, the Japan Cement Association, the National Ready Mixed Concrete Association in the US, the European Concrete Platform and the Federacion Iboamericana del Hormigon Premezclado (FIHP) which covers Latin America and the Iberian Peninsula

“The continuing and rapid growth of the association’s membership is very encouraging. With a strong work program now underway it’s important that our authoritative voice represents the growing list of cement and concrete manufacturers committed to our principles of enhancing industry sustainability efforts and driving innovation.” said GCCA chief executive officer (CEO) Benjamin Sporton.

The GCCA was launched in 2018. It aims to represent at least 50% of global cement production capacity.

India: A report by the Cement Sustainability Initiative (CSI) shows that the local cement sector is on track to meet its 2030 targets from the low carbon technology roadmap (LCTR). Direct CO₂ emission intensity fell by 5% in 2017 in the Indian cement sector compared to the 2010 baseline. CO₂ emission intensity, including onsite or captive power plant (CPP) power generation, was reduced by 6.8% compared to the 2010 baseline. The alternative fuels thermal substitution rate (TSR) increased by 5 times from 2010 to 2017. The sector consumed more than 1.2Mt of alternative fuels in 2017.

“Sustainability is a journey, not a destination. In our globalised and interconnected world, no one can solve alone the challenges ahead of us and the only opportunity to succeed is through collaborative partnerships, where the common interests of all are considered as more important than the sum of individual interests. This is exactly the spirit that has animated the CSI’s low carbon journey since 1999. This flagship project - with its members - has developed, implemented and shared collective solutions for measuring, reporting and improving its greenhouse gas reduction performance, year after year,” said Philippe Fonta, managing director CSI.

The CSI and the International Energy Agency (IEA) worked with nine local CSI member companies - ACC, Ambuja Cements, CRH, Dalmia Cement (Bharat), HeidelbergCement, Orient Cement, Shree Cement, UltraTech and Votorantim Cimentos - to carry out the status review on the sector’s performance trends, continuous implementation measures and notable achievements based on the milestones set in the 2013 LCTR. The Status Review Report was developed in consultation with Confederation of Indian Industry (CII), with support from International Finance Corporation (IFC) and the Cement Manufacturers Association (CMA).

The findings of the report show that the direct CO₂ emission intensity was reduced by 32kgCO₂/t cement to 588kgCO₂/t cement in 2017 mainly due to an increased use of alternative fuel and blended cement production, coupled with a reduction in clinker replacement factor. However, the study also shows that significant efforts will be needed to meet the 2050 objectives of 40% reduction. The CO₂ emission intensity (including onsite or CPP power generation) has reduced by 49kgCO₂/t cement to 670kgCO₂/t cement in 2017 compared to the baseline year. The report has highlighted the adoption of waste heat recovery (WHR) systems by local cement plants.

The alternative fuels TSR increased to 3% in 2017 from 0.6% in 2010. More than 60 cement plants in India have reported continual usage of alternative fuels, with 24% of the total alternative fuels consumed as biomass. The share of blended cements used in the total quantity of cement manufactured increased to 73% in 2017 from 68% in 2010, largely due to the market’s growing acceptance of blended cement, emerging awareness of sustainability concepts, the availability of fly ash from thermal power plants and the use of advanced technology. The production of Pozzolana Portland Cement grew to 65% in 2017 from 61% in 2010. The share of Portland Slag Cement in cement production remained flat, at less than 10%, over the same period. The clinker factor reduced to 0.71 in 2017 from 0.74 in 2010.

In August 2018 the Global Cement and Concrete Association (GCCA) said it was taking over the work previously done by the CSI from 1 January 2019.

UK: The Global Cement and Concrete Association (GCCA) has held its inaugural annual general meeting and symposium in London. Member companies ratified key deliverables for the association and set-out its priorities and work program. Albert Manifold, chief executive officer (CEO) of CRH, was confirmed as GCCA President and will serve for two years. Fernando A González, CEO of Cemex and Jianglin Cao, CEO of CNBM, were confirmed as Vice-Presidents.

The work program will focus on: position concrete as the sustainable building material of choice; promote international best practice in the areas of safety, production and the use of cement and concrete in the built environment; foster innovation in the cement and concrete sectors; make a positive contribution to global sustainable development; and promote the principles of a circular economy across the value chain.

“Concrete is the enabler of critical buildings and infrastructure that enhance the way we live – safe and durable homes, roads, hospitals, clean water, effective wastewater management, as well as providing the vital structures for the clean energy of tomorrow,” said Benjamin Sporton, the CEO of the GCCA.

The association was launched in January 2018. It represents 32 member companies with nine affiliate organisations. Its members hold 35% of global cement production.

UK: Cement companies from Asia and North America are the latest to join the Global Cement and Concrete Association (GCCA), bringing the total number of member companies to 20. News members include Mexico’s Grupo Cementos de Chihuahua (GCC), Israel’s Nesher Israel Cement, India’s Shree Cement and Taiwan’s Taiwan Cement Corporation. The number of GCCA affiliates is also growing with the addition of the Cámara Nacional del Cemento in Mexico the Federación Interamericana del Cemento (FICEM) in Colombia and the Union of Cement Producers – Soyuzcement in Russia.

GCCA members now include: Buzzi Unicem, Cementos Argos, Cementos Pacasmayo, Cemex, Çimsa Çimento, CNBM, CRH, Dangote Cement, Eurocement, GCC, HeidelbergCement, LafargeHolcim, Nesher Israel Cement, SCG Cement, Shree Cement Ltd, Taiheiyo Cement, Taiwan Cement Corporation, Titan Cement, UltraTech Cement and Votorantim.

The association added that further applications for membership and affiliate status have been received and are being processed.

Greece/UK: Titan Group has joined the Global Cement and Concrete Association (GCCA), a global organisation dedicated to strengthening and promoting the sector’s contribution to sustainable construction. The cement producer said that its participation would build on its commitment to, “actively engage in collaborative initiatives aiming to address global sustainability challenges.”

Launched in January 2018, the GCCA intends to become a respected industry voice and trusted source of information on sustainable construction. It complements and supports the work done by cement associations at national and regional level. As of January 2019 GCCA will incorporate the activities of the Cement Sustainability Initiative (CSI) following a strategic partnership with the World Business Council for Sustainable Development (WBCSD).