India: Ramco Cements says that its 16Mt/yr installed production capacity will increase to 20Mt/yr during its 2022 financial year that starts in April 2021 with the completion of a new plant at Kurnool in Andhra Pradesh and a third production line at its Jayanthipuram plant. The original plan to complete the work by the end of March 2021 was delayed by the coronavirus pandemic, according to the Hindu newspaper. The new integrated plant at Kurnool will have a clinker capacity of 2.25Mt/yr and a cement production capacity of 1Mt/yr. The third production line at the Jayanthipuram plant will have a production capacity of 1.5Mt/yr, increasing the plant’s total to 4.5Mt/yr.

The producer also plans to complete Phase 3 of the installation of a waste heat recover (WHR) unit at the Jayanthipuram plant. Phase 1 (9MW) was commissioned in September 2020, Phase 2 (9MW) in February 2021 and Phase 3 (9MW) is scheduled for after the third line is complete. So far the first two stages have reduced the cement plant’s power consumption from a thermal power plant by 15MW. The project has cost around US$30m.

Ramco Cements has spent US$345m out of its planned US$470m capital expenditure in the 2021 financial year, which ends on 31 March 2021.