Displaying items by tag: Fons Technology International

Tunisia: Brazil’s Votorantim Cimentos has ordered a clinker cooler and clinker roller crushers from Turkey’s Fons Technology International for an upgrade to its 1.2Mt/yr integrated Jbel Oust plant. Votorantim has been present in Tunisia since 2012 where it sells cement under the Jbel Oust brand.

Peru: UNACEM has ordered a clinker cooler for its Condorcorcha cement plant from Turkey’s Fons Technology International, part of Dal Engineering Group. The cement producer will replace its existing cooler with a new FTI clinker cooler. The FTI cooler is designed so that it can reuse the existing cooler casing and refractory. It has also ordered a three-roller crusher for its 1500t/day clinker production line. Installation is scheduled for September 2019. No value for the order has been disclosed.

Turkey: Dal Teknik Makina has completed an upgrade project on Kiln Line 1 at Nuh Çimento in Kocaeli. Key features of the project included increasing the line’s production capacity, decreasing its energy requirements, making savings on power consumption and lowering the exit temperature of the clinker. The work has increased the plant’s production capacity to 3400t/day from 2800t/day. Other benefits of the update include decreasing the specific heat consumption of clinker to 740kcal/kg clinker from 870kcal/kg clinker, reducing electrical power consumption by 7kWh/t and increasing the raw mill capacity to 185t/hr from 160t/hr. The exit temperature of clinker was also reduced to 55^oC plus the ambient temperature.

This project involved the design, manufacturing and erection of the pre-heater tower cyclones group, kiln feed transport system, clinker cooler, kiln hood, removing of dust cyclone at tertiary air duct, cooler vent fan modification, main bag filter duct modification and kiln inlet seal and commissioning of the system.

The first part of the upgrade project was the modification of the pre-heater tower, which as a result reduced the pressure drop, improved heat transfer and separation efficiency, and heat consumption. The second part of the project was the retrofit of the grate cooler. The clinker cooler, kiln hood, cooler fans and cooler vent fan were replaced by Fons Technology International. In this part, kiln hood, cooler vent, exit pipe of waste heat recovery (WHR) unit and tertiary air duct were modified as well. The third part was to replace the horizontal duct of main bag filter inlet with an inclined one in order to avoid dust accumulation. The last step was the replacement of the pneumatic kiln feed by bucket elevator.

The project followed Dal Teknik Makina’s Filter-To-Filter Pyro-Process Concept.

Bosnia & Herzegovina: Fons Technology International (FTI) has replaced the existing clinker cooler of Fabrika Cementa Lukavac’s (FCL) cement plant in Tuzla. The new cooler has a capacity of 2100t/day. After commissioning by FTI the cooler has achieved the targeted process figures with a smooth mechanical operation. As part of the project FTI reused the existing cooler casing, existing refractory, four of the existing fans and the existing hammer crusher.