Displaying items by tag: GCW475
Sumitomo Osaka Cement issues update on cement radioactivity
30 September 2020Japan: Sumitomo Osaka Cement says that independent tests have confirmed that the radioactivity levels of cement produced at its 0.9Mt/yr Tochigi plant in Sano, Tochigi Prefecture are “below the lowest detectable limit,” meaning that the product is safe. The company said, “We hope that you will continue to use our products with peace of mind.”
Production at the plant was disrupted in 2011 when it was discovered that it was co-processing sewage sludge sourced from near the Fukushima Daiichi Nuclear Power Plant in Ōkuma, Fukushima Prefecture. The power plant suffered a nuclear meltdown following the Tōhoku earthquake and tsunami in 2011 that led to widespread radioactive fallout.
Cemento Cruz Azul asserts control of CYCNA cement plants in Puebla and Aguascalientes
30 September 2020Mexico: The board of directors of Cemento Cruz Azul has asserted legal control of its Cementos y Concretos Nacionales (CYCNA) subsidiary cement plants in Puebla and Aguascalientes following accusations of ‘looting’ by partners in the company. In a video statement José Antonio Marín, president of the board of directors, said that the move would give the producer greater control over its operations since all cement would be registered in an internal audit programme, according to the Milenio newspaper. He alleged that some partners of the company had sold cement manufactured at the units independently.
José Antonio Cárdenas has been appointed manager of the CYCNA plants to replace Benito Rodríguez Fayad. Fayad allegedly had links to Cruz Azul’s former director Guillermo ‘Billy’ Álvarez, a former director of the company who is currently being investigated by law enforcement for links to organised crime and money laundering.
Carbon Trust validates Cemex’s 2030 CO2 reduction roadmap
30 September 2020Mexico: Cemex says that Carbon Trust has validated its roadmap to decarbonise global operations in line with the Sectoral Decarbonisation Approach (SDA) 2-degree scenario (2DS) developed by the International Energy Agency (IEA). The validated roadmap is intended to help the company to achieve a 35% reduction of net carbon emissions by 2030. The findings validate Cemex's roadmap for reducing Scope 1 and 2 emissions.
The Carbon Trust has assessed the technical feasibility of the plan based on guidelines defined by international institutions including the International Energy Agency, the Cement Sustainability Initiative, and the European Climate Research Alliance. The CO2 reduction methods include the use of alternative fuels, using decarbonated raw materials, renewable power projects, and novel cements, among others. The validation also included a review of Cemex's commitment to implement the scheme based on governance mechanisms and business planning.
“The magnitude and complexity of change required by a company such as Cemex to decarbonise its global operations is significant. Our assessment provides the organization’s management, investors and stakeholders with an independent validation that its commitments are backed up by sound assumptions and planning,” said Aleyn Smith-Gillespie, Associate Director Advisory at the Carbon Trust.
Lindner begins new headquarters and manufacturing plant construction
30 September 2020Austria: Waste processing specialist Lindner has celebrated the groundbreaking ceremony for its new headquarters. The company says that the 45,000m2 site will also encompass a new “state-of-the-art waste processing technology production plant.” It says that the facility will enable it to better serve the industries that depend on its expertise, including the cement sector. “That’s why it is so important to us to constantly expand this know-how, develop new solutions and systematically prepare and pass on the knowledge gained,” it added.
HeidelbergCement supplies concrete for 3D-printed Beckum house
30 September 2020Germany: HeidelbergCement says that it has supplied concrete for the construction of an 80m2 two-storey detached house in Beckum, North Rhine-Westphalia. The concrete contains i.tech 3D, a ground sulphoaluminate clinker developed by HeidelbergCement subsidiary Italcementi for use as an additive in concrete for 3D printing. Engineering & Innovation head Jennifer Scheydt said, “The development of a cement-bound material for 3D printing is a major challenge. It should be easy to pump and extrude. It must also quickly develop sufficient load-bearing capacity so that the lower layers do not give out under the load of the upper layers. At the same time, the bond between the layers must be ensured.”
The property, the first of its kind, will consist of three-shelled insulation-filled walls when completed in late 2020.
Shree Cement announces Chhattisgarh clinker unit plans
29 September 2020India: Shree Cement has announced that it plans to establish a US$135m clinker production unit in the state of Chhattisgarh. The company has said that the plant will become operational in mid-2022.
Secil Group signs waste heat recovery plant contract with CTP Team
29 September 2020Portugal: Secil Group has engaged Italy-based CTP Team to supply and install a 29MW waste heat recovery (WHR) plant at its 2.0Mt/yr Secil-Outão cement plant in Setúbal, Lisboa Region. Dry Cargo International News has reported that the WHR plant will include a 7.2MW Turboden turbine. CTP Team says that, when operational in mid-2022, the plant will cover 30% of the Secil-Outão cement plant’s electricity consumption, reducing its CO2 emissions by 14,000t/yr.
CTP Team said, “Thanks to the specific advantages of organic cycles and to the total absence of water treatments in the process, the operating expenditure (OPEX) is 75% lower than for an equivalent steam rankine-based WHR cycle.
Suez Cement company to make bid for Egyptian Tourah Portland Cement
29 September 2020Egypt: The board of HeidelbergCement subsidiary Suez Cement has approved the launch of a tender offer for the company to acquire a 100% stake in Egyptian Tourah Portland Cement. Reuters News has reported the value of the deal as US$32.6m.
Lucky Cement wins Pakistan’s Most Outstanding Cement Company 2020
29 September 2020Pakistan: Asiamoney has named Lucky Cement as most outstanding in the cement producers category of Pakistan’s Most Outstanding Company 2020 following a national poll. The Pakistan Observer newspaper has reported that “the aim of this poll is to identify and give recognition to Asia's most outstanding listed companies in each market and sector.”
UK: Welding Alloys says that it has carried out maintenance on a vertical roller mill at HeidelbergCement subsidiary Hanson’s 1.0Mt/yr Purfleet slag plant in Essex, repairing the mill’s Loesche 46 2+2S grinding table and rollers. The company said that the mill, which had ground 3500t of granulated blast furnace slag (GBFS), was “in urgent need of refurbishment.” Following a wear audit, Welding Alloys took the grinding components back to the profile template using its Integra Wire Mill products.
The group said that “both companies overcame the challenges of completing the project within the limited shutdown period while complying with the Covid-19 lockdown measures.”