Displaying items by tag: SRF

Lithuania: Recycling company Ekobāze is set to construct a plastic byproducts and solid recovered fuel (SRF) processing complex in the Akmenė Free Economic Zone. The project is valued at about €12m and received €10m in EU financing, according to BNS News. It will create 60 new jobs. The complex will supply SRF to Akmenės Cementas, the sole cement producer in Lithuania, utilising post-consumer plastic unsuitable for recycling in its production processes. Ekobāze will process other plastic into pellets. Construction will begin at the end of 2025, with production starting in early 2027.

Spain: Votorantim Cimentos will construct a solid recovered fuel (SRF) production plant at its subsidiary Cementos Cosmos’ plant in Oural, aiming to produce up to 0.15Mt/yr of alternative fuel, reports Digital Economia newspaper. The facility, spanning 5800m², will utilise non-recyclable industrial byproducts and various discarded materials from the local community such as plastic, paper and wood, to partially fuel the combustion in its cement kilns. The plant, currently in the public exhibition phase, will start production at 60% capacity, producing 85,000t/yr of alternative fuel. Plans include ramping up to full capacity to produce roughly 0.15Mt/yr. The new plant will create 15 jobs.

Votorantim Cimentos has not detailed the investment in the new facility, although the budget presented to the local council amounts to €12m.

Italy: The Italian cement industry decreased its overall CO2 emissions by 8.9% in 2018 compared to 2017, in part by replacing a higher proportion of fossil fuels with alternative fuels and biomass fuels. The proportion of alternative fuels used increased to 19.7% in 2018 compared to 17.3% in 2019, according to Federbeton. This translates to 387,000t of alternative fuels.

US: A waste-to-solid-fuel plant has broken ground in West Virginia. Its developers say it is the US' first resource recovery facility that employs mechanical biological treatment (MBT).

The waste-to-solid-fuel plant in Martinsburg, West Virginia, called Entsorga WV, is expected to be operational in early 2017. Entsorga WV is a joint venture between Apple Valley Waste Technologies, Entsorga USA and Chemtex International.

By utilising the HEBioT MBT system, Entsorga WV will recover biomass, plastics and other carbon based materials from the mixed municipal solid waste (MSW) stream and convert them into an alternative fuel. When processing the MSW, Entsorga WV will remove other recyclable commodities such as ferrous and non-ferrous metals. The MSW received will be converted to solid recovered (SRF), which will be used as an alternative or supplement to fossil fuels.

The plant will be able to produce about 50,000t/yr of SRF, which will be delivered to the Essroc Cement Plant and used in conjunction with coal. The companies have entered into a long-term contract for the provision and acceptance of the SRF.

The reduction of waste that will be disposed of in landfills as a result of the Entsorga facility will result in a greenhouse gas emission reduction of 28,000t/yr of carbon dioxide equivalent. There are currently more than 330 MBT plants in operation throughout Europe, processing more than 30Mt/yr of municipal solid waste.

South Korea: A new solid recovered fuel (SRF) production facility is now fully operational in Wonju City, South Korea, thanks to global shredding company UNTHA and local partner PERITUS.

Korean waste management specialist Zion has built the SRF manufacturing plant to make smarter use of its residual materials. Now, with the new system in place, pre-sorted construction and demolition waste and commercial and industrial waste, is being shredded to produce a homogenous 50mm fuel for the cement industry.

The UNTHA XR3000C shredder with cutting concept was chosen following a series of trials at UNTHA's Austrian headquarters. Demonstrations showed that the technology could comfortably achieve throughputs of 60-70t/day, with scope to almost double that moving forward. The XR3000C's flexibility also means Zion can achieve a 40-50mm particle size from the single step shredding of plastic bales, which has further boosted the company's SRF production capabilities.

"South Korea may only be in the infancy of its waste-to-energy journey, yet the nation has formed a very sophisticated and disciplined approach to its waste roadmap relatively quickly. Legislation is in place to drive the production of <50mm SRF and the necessary infrastructure is fast evolving to accommodate this," said UNTHA's Head of Business Unit Waste Peter Streinik. "What we see here with Zion, however, is not just a company striving for compliance. They're prioritising energy efficiency, profitability and innovation too, to realise the wider benefits that come with smarter waste management."

Committed to principles akin to Europe's waste hierarchy, Zion extracts as many materials as possible, including bricks, metal, sands, glass and batteries, for re-use or recycling, prior to them entering the SRF manufacturing stream.

"Our family-run business is incredibly passionate about renewable energy, from solar power to alternative fuel production," said Zion's President Geumju Kim. "Now that our new SRF plant is up and running, with state-of-the-art configurable technology in place, the next step is to investigate relationships with different customers. We can satisfy varied specifications, and look forward to improving South Korea's resource agenda."

Vietnam: Holcim is using shoes as an alternative fuel in Vientam thanks to its new solid recovered fuel (SRF) plant from shredding specialist Untha, according to Equipment World.

The new SRF plant will use waste from Vietnam's largest shoe factory once it has been delivered. It was pre-assembled and tested in Austria and is currently being shipped by sea to Holcim in Vietnam. Delivery is expected in September 2015. The SRF plant will convert the waste by using an anti-explosive Atex-specification XR3000 Cutter waste shredder with two 113kW motors, conveyor, over-band magnet, control room and water-powered fire suppression technology. The plant can process 10t of material into the 8mm, high calorific value fuel.

UK: Axion Polymers has invested significantly in new laboratory and testing facilities to ensure consistent quality of its solid recovered fuel (SRF) products and to satisfy the stringent standards of its technical end markets.

It has installed a laboratory-scale furnace at its large-scale processing facility, Shredder Waste Advanced Processing Plant (SWAPP), in Trafford Park, Manchester to enhance accurate measurement and testing of the physical and thermal properties of its Axfuel® SRF 30, an alternative fuel used by the cement industry, among others.

Axion has also recruited a quality control team working within ISO 9001 operating procedures to conduct in-house product testing, including analysis on critical aspects such as SRF calorific value and chemical composition. Samples are sent on a weekly basis to external laboratories for further testing and verification.

Derived from automotive shredder residue, Axfuel SRF 30 is a sub 30mm-sized mixture of textiles, fibre-fluff, plastic, foam and rubber, with a gross calorific value of 18 - 22MJ/Kg and available in large tonnages.

"We have made this important investment because alternative fuels from waste need to be treated as a product, not as a waste. If SRF is to deliver the fuel benefit and meet the technically-demanding specifications of our end markets, it has to be of consistently high quality so customers can buy with confidence," said Axion director Roger Morton. "By operating within strict quality controls, we can ensure our reliable supply of SRF is produced to exceptionally high standards. As this fuel is sourced from end-of-life vehicles, giving it a second life as an alternative high-energy feed is going to be an attractive option for companies who want to demonstrate their environmental credentials."

UK: Mid UK Recycling Limited plans to extend its Wilsford Heath waste management facility at Ancaster, South Kesteven in Lincolnshire. If its plans are approved, the plant would recycle up to 350,000t/yr of waste mattresses and plastics.

Chris Mountain, managing director, said that the investment could run into 'multiple millions' of Euros. "We are an existing business, we employ 350 people in Sleaford, Caythorpe and the Ancaster site," said Mountain. "We will put in the main planning proposal in the next three months and as soon as we get the green light we'll start straight away." He said that initially the company wants to start by the end of December 2015, although it may take three years to complete the expansion. "We have been four years developing the site next-door, which is full to capacity now," he said. "The range of products we produce is getting wider and wider. It makes no sense to export those jobs out of the county."

There would be a building for machinery that could break down mattresses into resalable parts. Leftovers would form solid recovered fuel (SRF) products, which could by cement plants and power stations. Another building would be created for packing and storing gypsum from recycled wallboard, which would be sold to supermarkets as cat litter. The business would also bring in a new way of recycling rigid plastics, breaking them down into granules to sell to Lincolnshire manufacturers of drainage pipes, water pipes and car parts.

Austria: UNTHA Shredding Technology has launched its new XR ripper and cutter series of pre shredders for the production of refuse derived fuel (RDF) and solid recovered fuel (SRF).

The new XR shredders offer flexibility to the final particle size by the use of two distinct cutting methods that can be configured and re-configured by the end user. The tearing motion achieves a rough shred of untreated waste, with a homogenous, pre-determined particle size between 100 - 400mm, while the final fraction size is regulated by adjustable screen bars. Load-dependent speed controls adjust the XR shredder's RPM and torque to maximise throughputs of up to70t/hr.

Key benefits of the XR shredder include:

• 45 - 50% less energy consumption, which can equate to over Euro631,066 in electricity savings over the lifetime of the machine,

• Load-dependent speed controls which adjust the RPM and torque to achieve maximum throughput of up to 70t/hr,

• Synchronous, water-cooled motors work tirelessly without overheating, guaranteeing the XR's unparalleled uptime statistics,

• Consistent particle sizes between 50mm - 400mm achievable, depending on requirements,

• Less than 75dB of noise output.