Displaying items by tag: Study

Philippines: A recent study from Cebu, Philippines presents a method for reducing greenhouse emissions in the cement industry. The research, supported by the Department of Science & Technology (DOST) of the Philippines, focuses on partially substituting cement with coal fly ash (CFA). According to the University of San Carlos researchers, CFA's efficacy as a cement substitute depends on its source, with variations in quality, performance, and water requirements when used in paste and mortar formulations.

The study evaluated CFA from a Philippine power plant, examining its use as a partial cement substitute. Researchers designed paste and mortar mixtures with different CFA-to-binder ratios and water-to-binder ratios. The study revealed that increasing the amount of CFA in cement up to 20% by weight could enhance compressive strength, ‘outperforming’ pure cement mixtures.

The study concluded that substituting a portion of cement with CFA not only reduces greenhouse gas emissions but also improves the compressive strength of the resultant material.

South Korea: A recent study from Daejeon explored the potential of low-lime calcium silicate cement as a low CO₂ emission alternative to Ordinary Portland Cement. Researchers from the Korea Institute of Geoscience and Mineral Resources examined the setting and flow characteristics of a mixture of Ordinary Portland Cement and low-lime calcium silicate cement under carbonation curing conditions. The study was financially supported by the Ministry of Trade, Industry & Energy's industrial strategic technology development programme.

The study aimed to explore the reaction and microstructural characteristics of these cement pastes. The low-lime calcium silicate cement was synthesised using limestone and silica fume, with varying proportions added to the Portland cement pastes. The research findings suggest improvements in compressive strength with the inclusion of 30% or more low-lime calcium silicate cement, highlighting its ability to enhance the durability and sustainability of construction materials.

UK: Aggregate Industries has engaged energy engineering firm Petrofac to investigate a carbon capture project at its Cauldon cement plant. Petrofac is currently conducting early engineering assessments to identify CO₂ capture opportunities at the plant in Staffordshire. This includes technology selection for any future project. Upon commissioning, a carbon capture system will support the storage of up to 600,000t/yr of CO₂ from the Cauldon cement plant under the Irish Sea as part of the cross-industry Peak Cluster carbon capture and storage (CCS) project.

Aggregate Industries decarbonisation manager Luke Olly said "Aggregate Industries is excited to be launching this carbon capture study, as we are aiming to fully decarbonise our cement plant by 2030. This technology is an important part of our strategy."

Petrofac head of business development energy transition projects, Alex Haynes, said "We’re looking forward to working with Aggregate Industries UK in finding a way to reduce the carbon footprint of its cement products."

India: Sweden-based SaltX Technology has partnered with Dalmia Cement (Bharat) to launch a pilot trial of fuel-free cement production using its electric arc calciner (EAC) in 2024. The pilot plant will be situated at Dalmia Cement (Bharat)’s Rajganga Nagpur cement plant in Odisha. Pre-study work, including material tests at SaltX Technology's test and research centre in Hofors, Sweden, will commence in early 2024.

Dalmia Cement (Bharat) managing director and chief executive officer (CEO) Mahendra Singhi said "In line with our ambition to further reduce our carbon footprint, we are delighted to collaborate with SaltX, a leading innovator with electrification and carbon capture technology that has great potential to play a decisive role in our intense work to reduce our carbon emissions."

SaltX Technology CEO Carl-Johan Linér said "I am pleased to confirm that we have now started working together on-site for the upcoming pilot in India. We have met all key individuals in the project and look forward with confidence to starting the pre-study next year."

Taiwan: Asia Cement Corporation tested its waste wind turbine blade processing capacities using 12t of blades earlier in November 2023. The cement producer had previously processed 9t of waste turbine blades for use in its plants up to the end of October 2023. Asia Cement Corporation says that the waste consists of fibre-reinforced plastic (FRP), which is 60% silicon dioxide, calcium oxide and aluminium oxide and 40% polyester. The polyester can replace fossil fuels as alternative fuel (AF) for cement plants, while the other chemical compounds can serve as supplementary cementitious materials (SCMs).

Thailand: China-based intelligent dumptruck supplier Waytous has partnered with Siam Cement Group (SCG), as well as Thailand Advanced Info Service, Huawei, and Zhengzhou Yutong Mining Equipment, to develop full-scope automated operating systems for limestone mines. SCG will host a study at its Saraburi limestone mine in Central Thailand. The study will use Waytous’ driverless vehicles, supported by 5G, AI, cloud computing and new battery technologies.

Waytous CEO Chen Long "We've carried out two phases of unmanned mining research for this project and found the most comprehensive, efficient, and effective unmanned solution for cement mines in Saraburi.”

UK: First Graphene and Breedon Group have entered into a development and commercialisation agreement. Together, the companies aim to enhance Breedon Cement’s CEM II Portland limestone cement (PLC) through the use of First Graphene’s graphene enhanced grinding aids and cement admixtures. Breedon will provide increased access to cement production lines in order to optimise the understanding of the processing environment and operating conditions.

Breedon Group’s Hope cement plant in Derbyshire previously conducted a 24-hour graphene-enhanced cement production trial on 28 June 2023.

UK: The Cement 2 Zero project has successfully concluded its first trial melt of recovered cement paste in an electric arc furnace at the Materials Processing Institute’s Teesside campus. The project uses the paste as flux for electric steel recycling. Cambridge Electric Cement (CEC) has demonstrated that the ‘slag’ from this process can be ground into fine clinker that, when mixed with gypsum and supplementary cementitious materials (SCMs), produces net zero CO₂ cement. The Cement 2 Zero project to produce CEC’s cement at an industrial scale launched in March 2023, with US$7.85m in funding from UK Research and Innovation. Tarmac will grind the clinker from the project’s trial melts for testing in order to obtain certification and specification as a usable cement product.

India: The India Cements expects to commission the upgraded grinding unit at its Sankar Nagar cement plant in Tamil Nadu later in September 2023. Hindu BusinessLine News has reported that the producer is undertaking the upgrade in order to increase efficiency and lower the plant’s operating costs. The producer has hired US-based Boston Consulting Group to ascertain other possible improvements to three of its plants in Andhra Pradesh and Telangana. At its Chilamkur cement plant in Andhra Pradesh, it is installing a waste heat recovery (WHR) system, scheduled for delivery in early 2024. FLSmidth and ThyssenKrupp Industrial Solutions are both reportedly conducting ‘detailed studies’ for possible future projects for The India Cements.

Europe: Norway-based Capsol Technologies says that it has signed contracts for two new feasibility studies for carbon capture installations at ‘large cement plants’ in the EU. If successful, the plants will proceed to the installation of Capsol Technologies’ CapsolEoP carbon capture systems. Nordic Daily News has reported that the technology reduces the energy consumption of carbon capture by 50%, and lowers its costs by 25%, according to the supplier.

The new contracts bring Capsol Technologies’ number of cement industry carbon capture contracts to four, and its total contracts to nine, with a potential CO₂ capture capacity of 10Mt/yr.

CEO Jan Kielland said "We are pleased that our solution is gaining attention, as demonstrated by an increasing number of incoming requests for sales engineering and engineering studies, and look forward to being a major contributor in the path to net zero for cement.”