Displaying items by tag: GCC

US: GCC plans to invest US$750m in an upgrade to its 0.9Mt/yr Odessa cement plant in Texas. The Milenio newspaper has reported that the upgrade will more than double the plant’s capacity to 1.9Mt/yr and lower its CO₂ emissions per tonne of cement by 13%. GCC expects the new capacity to be operational by 2025.

The group said “GCC will carry out the project at the Odessa plant because the US market is developing faster and represents savings in freight compared to the plant located in Chihuahua, Mexico.”

Mexico: GCC increased its sales revenue by 11% year-on-year to US$320m in the second quarter of 2022. Its US cement sales volumes rose by 6%, with a 10% rise in prices, while its Mexico cement volumes fell by 2.3%, with a 12% rise in prices. The group’s cost of sales was US$220m, 69% of total sales, compared to 67% in the second quarter of 2021.

Mexico: GCC has announced its plan for a 100% Portland limestone cement (PLC) transition of its Samalayuca, Chihuahua, cement plant. The producer says that the plant will complete its transition in July 2022. It said that the move is part of its CO₂ emissions reduction roadmap.

Mexico: GCC recorded consolidated sales of US$207m in the first quarter of 2022, up by 16% year-on-year from first-quarter 2021 levels. US sales growth of 21% contributed to the increase, driven by regional cement volumes growth of 10%. The group's cement volumes in its native Mexico rose by 12%. Its earnings before interest, taxation, depreciation and amortisation (EBITDA) in the quarter reached US$54.5m, up by 10% year-on-year. Following the results, the company plans to reactivate its on-going share buyback programme.

Chief executive officer (CEO) Enrique Escalante said "GCC is off to an excellent start this year. We are pleased with the results delivered during this quarter and of the way we are overcoming a high inflation environment amid global challenges. One of our top priorities is being extremely vigilant in offsetting cost pressures as we capitalise on market opportunities and focus our efforts in maximising production and terminal outputs. Market trends and full-year backlogs are encouraging for 2022; therefore, we expect to end the year in line with our high-single to double-digit EBITDA growth guidance."

Mexico: Increases in raw material prices and energy costs, as a result of high inflation levels, will affect the operating margins of cement companies listed on the Mexican Stock Exchange in the first quarter of 2022, according to analysts quoted by CE NoticiasFinancieras.

Jacobo Rodríguez, director of Economic Analysis at Black Wallstreet Capital, explained that, "Despite the fact that companies are slow to pass on the increase in their costs to their final products, we will see pressure on their margins in their results in the first quarter of the year and from now on.”

Heriberto Sandoval, investment advisor at Increase Kapital, said “The cement industry is strongly affected by the increase in energy costs and, considering that the high cost pressures worldwide will be longer lasting than originally thought, this will lead to a decrease in earnings before interest, tax, depreciation and amortisation (EBITDA) this year.”

Mexican cement companies recorded a decline in the price of their shares between January and March 2022. Market leader Cemex led the way, with a 23.59% drop in the value of its shares. The second largest drop was seen by GCC, which lost 9.5% of its value. Cementos Moctezuma’s shares also lost 3.05% of their value in the first quarter of 2022.

US: The Environmental Protection Agency (EPA) has awarded its Energy Star certification to cement plants belonging to two Titan America subsidiaries. Titan Florida’s Pennsuco, Florida, cement plant has secured its 14th consecutive Energy Star, while Roanoke Cement’s Troutville, Virginia, cement has secured its 15th consecutive Energy Star.

Other cement plants to receive Energy Stars in 2022 included two Argos USA plants (Calera, Alabama, and Harleyville, South Carolina), two GCC plants (Pueblo, Colorado, and Rapid City, South Dakota), Buzzi Unicem’s Chattanooga, Tennessee, plant and three plants in Arizona: CalPortland’s Rillito plant, Drake Cement’s Paulden plant and Salt River Materials Group’s Clarkdale plant.

Mexico: GCC has reported that a worker at its Chihuahua cement has died in hospital following an explosion on 25 Feburary which injured five others. The company says that it activated all safety protocols in response to the disaster and coordinated its actions with the responding authorities. It continues to support the investigation into the cause of the blast.

The company said “Unfortunately, one of the six injured died in hospital. We are currently in contact with his family, to whom we have expressed our deepest condolences, and with the families of our other injured collaborators to make all our support and resources available to them at this difficult time.”

Mexico: GCC has signed an engineering, procurement and construction (EPC) contract with ThyssenKrupp Polysius for an upgrade to its integrated Samalayuca plant to increase clinker production capacity, raise the usage of alternative fuels and reduce emissions. The project includes the engineering, supply and modification of the preheater, including cyclones, and an extension to the calciner, with the installation of a Prepol SC-S type system to increase the utilisation of alternative fuels. The work also includes fitting a Polytrack type clinker cooler and the installation of a bypass system. The project will begin in 2022 with operations scheduled to start in the second quarter of 2023.

Argos USA announced this week that its integrated Roberta plant in Alabama is set to produce 100% Portland limestone cement (PLC) by June 2022. As part of the transition three of its terminals in North Carolina will also switch over at the same time. The company also expects that all of its plants will convert to PLC in 2023. Cement sites including Newberry in Florida, Harleyville in South Carolina and Martinsburg in West Virginia are already producing PLC.

The change by Argos marks the latest example in an ongoing trend of US-based cement companies moving entire plants to PLC production. In September 2021 LafargeHolcim US said that its integrated Midlothian plant in Texas was preparing to convert to full PLC production and that it would be the first plant in the US to do so. It later confirmed that the plant had done so by the end of 2021. In October 2021 GCC said that its Trident Plant in Montana would fully move to PLC in early 2022. Then in November 2021 Titan America said that its Pennsuco cement plant in Florida would make the change possibly by 2023. Moving into 2022 brought the news that LafargeHolcim US’ Ste. Genevieve plant in Missouri and its Alpena plant in Michigan had each transitioned to PLC production. Lehigh Hanson then rounded up the bunch earlier this month, at the start of February 2022, when it announced that a PLC was the primary product now coming out of its Mason City plant in Iowa. It even invited a US Member of Congress to celebrate!

The current expansionist phase of PLC usage in the US dates back to late 2020 when the Portland Cement Association (PCA) launched a dedicated website to promote the use of the blended cement by discussing its applications and benefits. It then released a new environmental product declaration in March 2021 and PLC received a mention in the PCA’s Roadmap to Carbon Neutrality when it was released a year later in October 2021. Lots of work went into PLC prior to 2020 though, both by the PCA and others. The first commercial production of PLC in the US started in 2005 and PLC gained its own blended cement specification in 2012. Notably, the PCA has been tracking the state acceptance of PLC by the Department of Transportation and it grew markedly during the 2010s.

The US is playing catch-up with PLC. In Europe its usage dates back to the 1960s. Cembureau, the European Cement Association, reported usage of around 30% in 2004. More recently in 2020, the VDZ, the German Cement Association, reported a similar figure domestically with the proportion of blended cement shipments including limestone, shale and multiple additives at 31.6%. In the US it is hard to gauge the scale of the current move towards PLC by producers, due to limited publicly available data. A PCA survey reported PLC production of 0.89Mt in 2016. If all the plants mentioned above convert fully to PLC and maintain their rated production capacity that would be something like 14Mt/yr of PLC in 2023 or 11% of the US’s total cement capacity. For comparison, the United States Geological Survey (USGS) reported total shipments of all blended cements at 3.3Mt in 2020 and a total of 5.4Mt for the first 11 months of 2021. Plus, remember that PLC is just one blended cement among others, like those that use slag or fly ash.

Recent developments show that a large change is coming towards the US cement market in the update of blended cements. It’s been a long time coming but the last six months have seen brisk increases in PLC production at scale. The exact data is not available but one might expect something around triple the current number of production plants making PLC if the US market heads towards European levels. This rough estimate doesn’t take into account existing partial PLC production levels. At the same time the US cement sector should see a fall in its emissions due to PLC’s 10% reduction in CO₂ emissions compared to ordinary Portland cement

Mexico/US: GCC plans to invest US$500m over the next three years to the end of 2024 on increasing its production capacity and strengthening its logistics and distribution network in North America. New projects in development include the expansion of a cement plant, debottlenecking at the integrated Samalayuca plant in Mexico, the construction of two new terminals and other projects to improve the company’s operational efficiency and its social and environmental strategy. The cement producer reported strong sales in 2021 and it expects even better results in 2022 and 2023, particularly in the US, due to the effect of the US infrastructure bill.

Notably GCC reported that both the kilns at its Odessa plant in Texas were running at full capacity in 2021 and an additional kiln at a plant in Chihuahua, Mexico was complimenting supply to the US state. High demand was also recorded in Montana.