Displaying items by tag: Queens Carbon

US: Queens Carbon has secured US$10m in seed funding to scale up production of its novel cement and supplementary cementitious materials (SCMs). The start-up will build a 2000t/yr demonstration plant at strategic partner Buzzi Unicem USA's Stockertown, Pennsylvania, cement plant. The plant will demonstrate Queens Carbon’s low-energy Q-Reactor technology, which employs novel hydrothermal chemistry, with the help of steam and pressure, to combine standard cement feedstocks into carbon-neutral hydraulic cement and SCMs. The company’s flagship product, Q-SCM, is capable of replacing up to 50% of cement in concrete mixes. Queens Carbon says that it will now also begin preparations for its first full-scale commercial plant.

Buzzi Unicem USA was among investors in the seed funding round, led by Climate technologies investor Clean Energy Ventures, with participation from fellow venture capital firm Plug and Play.

Queens Carbon CEO Daniel Kopp said "With support from Clean Energy Ventures, Buzzi Unicem USA and the US Department of Energy, we're building next-generation technology and assembling the creative talent needed to drive industry revenues to move cement innovation forward and significantly reduce CO₂ emissions from cement production, all without a green premium."

Luigi Buzzi, Chief Technology Officer at Italy-based Buzzi, said "We know that achieving our goal of net-zero carbon emissions by 2050 demands forward-thinking solutions to enhance both our operations and our environmental performance.”

US: Queens Carbon has secured a US$14.5m grant from the US Department of Energy under its SCALEUP program. The funding will support the pilot of Queens Carbon's low temperature, ‘zero CO₂’ emission technology at an existing cement production site. Queens Carbon's supplementary cementitious materials, which replace 20-50% of the high-CO₂ binder in cement, will be produced at a pilot plant with a capacity of 10t/day.

CEO Daniel Kopp said “This SCALEUP grant is a tremendous step forward on our path to commercialisation. Partnering with the Department of Energy and a major cement industry player to deploy, operate, and optimise our 10t/day pilot plant will put us on an accelerated path to gigatonne-scale CO₂ reductions.”

Global: The Global Cement and Concrete Association (GCCA) has announced new collaborations between global cement manufacturers and technology start-ups, focusing on the development of low carbon concrete. Four start-ups—EnviCore in Canada, Queens Carbon and Chement, both in the US and NeoCrete in New Zealand—were part of the 2023 GCCA Innovandi Open Challenge and have now partnered with cement manufacturers. These partnerships aim to reduce the carbon footprint of concrete.

The startups will receive access to industry plants, labs and networks to fast-track their technologies. They will also demonstrate their progress on 6th June 2024 in Bangkok, Thailand, during the GCCA's CEO and Leaders Conference. The association continues its efforts under the 2050 Net Zero Concrete Roadmap, with 29 new start-ups shortlisted this year to work on carbon capture, utilisation and storage (CCUS) technology.

It has been a busy week for carbon capture in the cement sector with Global Cement covering five stories. However, increasingly, the topic has become a regular feature in the press as the industry bends to the demands of the carbon agenda. This week’s selection is notable because three of the stories cover North America.

Holcim US announced that it is working with Ohio State University and GTI Energy to design, build and test engineering-scale membrane carbon capture technology at the Holly Hill cement plant in South Carolina. The information builds on an earlier release from the US Department of Energy’s (DOE) Office of Fossil Energy and Carbon Management (FECM) in late December 2023 about the project. It has a total budget of US$9m, with US$7m supplied by the DOE. It plans to build a 3t/day CO₂ capture unit that uses a method intended to retain 95 - 99% of CO₂ from cement kiln gas with a purity exceeding 95%. The new information at this stage is that GTI Energy is involved. Specifically, it will support the development of the pilot skid for site deployment.

The other two stories from North America are worth noting because they both concern commercial equipment or technology suppliers joining up to work together. First, 10 companies - Biomason, Blue Planet Systems, Brimstone, CarbonBuilt, Chement, Fortera, Minus Materials, Queens Carbon, Sublime Systems, and Terra CO₂ - announced they were launching the Decarbonized Cement and Concrete Alliance (DC2). The group’s principal aim is to lobby the US government toward using new low-carbon cement and concrete products in public infrastructure. It also intends to look at advocacy and public sector engagement including expanded tax credits, development of standards for novel cements, consistent ecolabeling and accounting, and customer demand support. DC2 was formally launched in January 2024 but it follows previous work by the companies in the area. The other related story was a memorandum of understanding that Aker Carbon Capture and MAN Energy Solutions have also signed this week to jointly pursue opportunities related to carbon capture, utilisation and storage (CCUS) and CO₂ compression in the North American market. These two companies have worked on the full-scale CCUS unit at Norcem’s Brevik cement plant, which is due to be commissioned later in 2024. They are likely intending to capitalise on the publicity that is likely to be generated once it officially starts up.

Back in North America the DC2 Alliance noted in its press release the DOE’s release of its Pathways to Commercial Liftoff: Low-Carbon Cement report in September 2023. Although it is similar to many other varied sector roadmaps, including the Portland Cement Association’s Road to Net Zero that was released in 2021, this document is well worth reading due to its details and local market context. The headline figure, for example, is that following a set of pathways to fully decarbonise the US cement industry would cost US$60 - 120bn by 2050. Doing so would involve reducing the clinker factor, improving energy efficiency, increased use of alternative fuels, using CCUS, using alternative feedstocks and adopting alternatives to traditional cement production methods.

Graph 1: US active cement kilns by capacity and age. Source: PCA survey data used in Department of Energy Pathways to Commercial Liftoff: Low-Carbon Cement report.

One other interesting tidbit to consider from the report is an analysis of the age of the US cement sector’s kilns versus their production capacity as shown in Graph 1 above. The largest 10 kilns in the country account for 22% of the country’s total capacity and these were all built after 2000. Then, the next 44% of the national capacity comes from 38 kilns out of a total of 120 kilns at 98 cement plants. The report itself does not make this assertion but the implication is that retrofitting CCUS units at one third of the country’s clinker lines would capture the CO2 being emitted from two-thirds of the sector’s production capacity. This is not to say that this could actually work technically, logistically or economically. Yet seeing the scale of the challenge presented in this way is fascinating and one starts to have thoughts about how a retrofit roll-out of CCUS units might actually be approached.

Whether the cement sector adopts CCUS at scale remains to be seen but demonstration projects are definitely coming in both Europe and North America. The DOE report from September 2023 suggests that decarbonisation will cost a lot of money. No surprises there and, as ever, there is rather less detail on who will actually pay for this. One thing that might help here, that the DOE report mentions frequently, is the 45Q carbon capture tax credit scheme, which was introduced by the Trump administration in 2020. Regardless of the potential bill for consumers of cement though, the suppliers are clearly taking note of the investment potential as evidenced by all the non-cement plant CCUS news stories this week.

The 1st Global CemCCUS Conference will take place 13 - 15 May 2024 in Norway and it will include a plant tour of the Norcem Brevik cement plant and CCS project

North America: A new coalition for the scaling and deployment of low-carbon building materials, the creation of new clean cement and concrete jobs and the promotion of environmental justice launched earlier in January 2024. Called the Decarbonized Cement and Concrete Alliance (DC2), it comprises alternative cement developers Biomason, Brimstone, Chement, Fortera and Terra CO₂, sequestration company Blue Planet Systems, circular concrete producer CarbonBuilt, biogenic limestone producer Minus Materials, hydrothermal processing technology developer Queens Carbon and electrified cement production technology developer Sublime Systems. DC2’s areas of engagement in policy will include tax credits, standards, ecolabeling and subsidisation, in line with the US Department of Energy’s Pathways to Commercial Liftoff: Low-Carbon Cement strategy.

CarbonBuilt’s government and community affairs manager Sal Brzozowski said “DC2’s platform of robust policy, standards and incentives to scale innovative solutions will not only accelerate deep decarbonisation, but also transform the concrete industry from one of the world’s largest CO₂ emitters to one of the world’s largest carbon sinks.”

World: The Global Cement and Concrete Association (GCCA) has named the 15 anticipated deliverers of low-CO₂ cement and concrete production shortlisted for participation in its second Innovandi Open Challenge. The association chose the start-ups based on their potential to deliver CO₂ emissions reduction in the global cement and concrete sector in line with its Concrete Future 2050 Net Zero Roadmap. The applicants are presenting their pitches to GCCA members on 30 June 2023. All those accepted will gain access to members' plants, labs, networks and expertise. The following start-ups made the Innovandi Open Challenge 2023 shortlist:

GCCA cement director and innovation lead Claude Loréa said “We received more than 70 quality applications, so drawing up a shortlist was challenging." Loréa continued "Our essential industry needs something easily scalable and affordable. Those start-ups on the list demonstrated the most potential, and we look forward to hearing more about their ideas. But we’ll also be keeping in touch with other start-ups who didn’t make this year’s shortlist, with future projects in mind.”