Displaying items by tag: pilot

France: Hoffmann Green Cement Technologies’ pilot plant at Bournezeau, Vendée is set to start commercial production of low-carbon cement products in January 2019. Construction of the 50,000t/yr unit is due to be completed in October 2018 with its inauguration scheduled for late November 2018, according to Batiactu. The plant will employ 10 workers initially and this will rise to 15 – 20 as production ramps up.

The producer intends to make cement products using metakaolin and blast-furnace slag. If the pilot plant is a success it then intends to raise funds to build a 0.5Mt/yr plant.

China: Anhui Conch has spent over US$7.9m on a 50,000t CO₂ capture and purification pilot project at its Baimashan cement plant in Anhui province. The unit is scheduled to start operation in the first half of 2018. The group has started the project in order to participate in the government’s ‘Intended Nationally Determined Contributions’ CO₂ emission reduction initiative.

US: CarbonCure has demonstrated an integrated CO₂ capture and utilisation (CCU) process from cement for concrete production in January 2018 at Cementos Argos’ Roberta plant in Calera, Alabama. The consortium - comprising Carbon Cure, Sustainable Energy Solutions (SES), Praxair, Cementos Argos and Kline Consulting - says it is the world’s first project to collect cement kiln CO₂ for subsequent utilisation downstream in concrete production and construction.

CO₂ emissions from the Roberta cement plant were captured by SES’ Cryogenic CO₂ Capture technology, transported by Praxair and reused in Cementos Argos' Glenwood, Atlanta concrete operations equipped with CarbonCure's CO₂ utilisation technology. The concrete manufactured with the waste CO₂ from the Roberta cement plant was then used in a local construction project in the greater Atlanta area. Design partners and fellow members of CarbonCure’s Carbon XPRIZE team such as LS3P Architects, Uzun + Case Structural Engineering, and Walter P Moore Structural Engineers completed the end to end integrated solution by creating demand for CarbonCure concrete products in the marketplace. Kline Consulting oversaw the commissioning and reporting of the industrial demonstration.

The project was an extension of Team CarbonCure's participation in the US$20m NRG COSIA Carbon XPRIZE Challenge, which incentivises and accelerates the development of integrated CCU technologies and new markets that convert CO₂ emissions from coal and natural gas power generation into valuable products.

Belgium: HeidelbergCement has hosted a ground breaking ceremony for the Calix carbon capture pilot at CBR’s cement plant at Lixhe. The ceremony itself took place at the Liège Oupeye Water Treatment Plant near Liège as part of the inaugural Innovation in Industrial Carbon Capture Conference. The two-day event, which took place on 7 – 8 February 2018, was organised by the Low Emissions Intensity Lime And Cement (LEILAC) Consortium, a European Union (EU) Horizon 2020 backed research and innovation project.

Construction work on the pilot at the cement plant is scheduled to start imminently. The project will test Calix’s carbon capture technology for two years at an operational cement plant. The technology has previously been used in the magnesite calcining sector.

Over 130 delegates from industry, academia and government attended the conference. The agenda was designed to encourage discussion and knowledge sharing across key stakeholder groups with a strategic interest in innovation in carbon capture technology. As part of the programme, the wider challenges faced by the cement and lime sectors in Europe were also explored focusing on how EU industries can contribute to reaching climate change targets, the role of innovation and company entrepreneurship and a knowledge exchange fair on technology.

The LEILAC consortium, which consists of representatives from the lime and cement industries, technology and engineering providers and research institutes, has set up as an industrial project securing Euro12m in EU funding in order to demonstrate technology to reduce carbon emissions from cement and lime industries.

Austria/Germany/Italy: The European Cement Research Academy (ECRA) has launched its oxyfuel carbon capture pilot projects at HeidelbergCement’s Colleferro plant in Italy and LafargeHolcim’s Retznei plant in Austria. The two locations were chosen form a shortlist of five sites. The pilots will test oxyfuel technology on an industrial scale. The test phase of the research is expected to cost Euro80m and the cement industry has contributed Euro25m towards this. ‘Substantial’ funding from European or national research schemes is being sought.

“The technical feasibility of oxyfuel technology can only be proven in real-scale application, but we have sufficient information from our research to believe that we will obtain a positive result after the trials” said Daniel Gauthier, chairman of ECRA.

Nigeria: Danladi Matawal, the Director-General, Nigerian Building and Road Research Institute (NIBRRI) said the institute’s pilot pozzolana cement plant at Ota in Ogun is ready for commercialisation. He has asked cement producers and other stakeholders to invest in the project, according to an interview with the News Agency of Nigeria reported upon by the Nigerian Sun newspaper.

The pilot project has a production capacity of 2t/day and it is ready for testing on an industrial scale. The unit was commissioned in May 2017 by Ogbonnaya Onu, the Minister of Science and Technology. NIBRRI is also planning a volcanic-based Pozzolana pilot plant in Bokos, Plateau that will be commissioned in 2018.