Displaying items by tag: Order

Kenya: Samson, a subsidiary of Aumund Group, has delivered four hoppers with ATEX certification to the Port of Mombasa operated by the Kenya Port Authority. The new equipment will be used to import clinker, coal and gypsum to the site. Peak rates of 700t/hr per hopper are expected to considerably improve the import capabilities of the port.

The hoppers are decked with inlet grills with suction capacity, a reverse-jet cleaning system, air compressors, a flex-flap filtration system creating a pressure differential between the inner and outer hopper areas and dust filters on three sides of the hopper. The hoppers are mobile with powered travel and crabbing functionality which lets them be positioned alongside a vessel for unloading and which will allow them to be manoeuvred off the quay and freeing up space when not required. Samson says that these are the first ecological hoppers to be provided with ATEX certification.

This equipment was sourced to fulfil the aims of TradeMark East Africa - Kenya Port Authority Port Resilient Infrastructure Programme to improve port facilities whilst minimising the environmental impact of port operations.

Pakistan: Germany’s Aumund Fördertechnik is supplying equipment for a new 8000t/day production line that Flying Cement is building at its Mangowal plant in Punjab Province. Aumund is providing bucket elevators, pan conveyors and silo discharge gates for the project.

One belt bucket elevator will feed raw meal to the silo. It is designed with a centre distance of 87.6m and will reach a capacity of around 650t/hr. The other belt bucket elevator will also have a capacity of 650t/hr. Its centre distance is 115m and it will take raw meal to the heat exchanger. Flying Cement will use an Aumund KZB 1200/400 pan conveyor to transport clinker to the main silo. This conveyor will be approximately 115m long, with a lift of 43.5m, and a capacity of up to 580t/hr. The off-spec silo will be served by an Aumund KZB 1200/400 pan conveyor which is 42m long and has a capacity of 580t/hr. The order also includes 13 silo discharge gates.

The bucket elevators will be dispatched to Pakistan at the beginning of August 2018 and the pan conveyors will be supplied in a second consignment at the end the year.

Ecuador: FCT Combustion has won an order to supply a clay dryer to Cemento Chimborazo. The order includes a complete raw material drying system. It consists of a 41.2t/hr Triplex drier and a fluidised bed combustion system for petcoke and alternative fuel firing. No value or commissioning date has been disclosed.

India: Larsen & Toubro has won an order to build cement plants in Odisha and Andhra Pradesh. The end client has not been named and no value has been disclosed. The cement plant orders were announced as part of a wider set of orders worth over US$590m, including government construction projects.

Mexico: Germany’s Loesche has sold two coal or petcoke grinding mills to Cruz Azul. Both will be used on new production lines at cement plants in Hidalgo and Oaxaca respectively. No value for the deal has been disclosed.

Each mill will have a capacity of 65t/hr. Loesche will be supplying complete plant equipment, including process gas filters, mill fans, inerting units, explosion protection valves, kiln gas cyclone separators, feed screw and drag chain conveyors as well as the complete electrotechnical equipment. The scope of supply also includes engineering for steel and concrete construction.

Loesche previously delivered a LM 46.2+2 CS type mill to Cruz Azul’s Tepezalá cement plant, operated under the Cycna subsidiary, at the end of 2016.

Philippines: Denmark’s FLSmidth has won mill orders from San Miguel Northern Cement, Ionic Cementworks Industries and Oro Cemento Industries Corporation. It will supply four OK 56-4 vertical roller mills for cement grinding for the clients at different locations in the country. In addition FLSmidth will also deliver planetary mill gear units and air pollution control filters. The mills are expected to be installed by mid-2019. No value for the orders has been disclosed.

South Africa: Gebr. Pfeiffer has started installing a MVR 3750 C-4 mill for a joint venture between Osho Cement and HeidelbergCement that is building a cement grinding plant at Port Elizabeth. The deal was agreed in 2017 and TCDRI is the general contractor. It is Gebr. Pfeiffer’s first MVR mill in the country.

The new mill will be grinding 110t/hr of Ordinary Portland Cement (CEM I) to a fineness of 3500cm²/g Blaine and 80t/hr of blast-furnace cement (CEM III-A) to 4500cm²/g Blaine. A SLS 3750 BC classifier with high-precision cut will be mounted on top of the mill. The mill will have an installed power of 2600kW. It is intended to start operation later in 2018.

Italy/Switzerland/Turkey: Turboden has released information on its latest waste heat recovery (WHR) projects using its ORC turbogenerator for cement plants in Turkey, Switzerland and Italy.

In Turkey CTP Team and CTN Group have signed an order with Turboden for the supply of a 7MW ORC WHR unit with air cooled condenser to be installed in Çimko Çemento Narli’s plant. Turboden says that since the plant is located in an area where there is no water available for the cooling system, the ORC technology offer advantages over steam technology.

In Switzerland CadCime SA and LafargeHolcim have ordered a 1.3MW WHR unit that recovers heat from the existing pressurised water circuit, used for the district heating network. The order is the third from LafargeHolcim for an ORC unit from Turboden.

In Italy a 2MW WHR plant with direct heat exchange is being installed at Cementi Rossi’s plant. Start-up is schedule for the second quarter of 2018. This project received an award from the European Commission under the framework of Horizon 2020, whose main objective is to develop new solutions to recover waste heat in energy intensive industries such as cement, glass, steelmaking and petrochemical and transform it into electric energy.

Nigeria: Germany’s Gebr. Pfeiffer has struck a deal to sell a MVR 6000 R-4 mill for raw material grinding and a MPS 3350 BK mill for processing coal for kiln firing for Dangote Cement’s new plant at Okpella in Edo State. The mill order is the first for Gebr. Pfeiffer from the Nigerian cement producer. The order was placed by the China’s Sinoma International Engineering.

The MVR mill featuring a total drive power of 4000kW will be grinding 550t/hr of cement raw material to a fineness of 10% R 90µm. The MPS 3350 BK with a drive power of 1100kW is designed for a throughput rate of 50 - 70t/hr and will grind Nigerian coal, imported coal and/or pet coke, to a fineness of 12% R 90µm. Gebr. Pfeiffer’s own staff will supervise erection and commissioning.

Morocco: China’s CBMI has signed a contract with LafargeHolcim to build a cement grinding plant near Agadir. The deal for the SSS 13 & 14 Grinding Plant EPC Contract was signed on 21 March 2018 at the LafargeHolcim Technology Centre in Lyon, France. Once operational the plant will be run by LafargeHolcim Maroc.