Mali: Sacko Holding has completed a feasibility study at the site of its upcoming integrated cement plant in Bema, Bamako District. Mali Actu has reported that the plant will directly employ up to 300 people, increasing to up to 400 people after 2 – 3 years. Chief executive officer Ousmane Koné said that the plant would aim to meet local demand and export some cement. Construction is set to begin by the end of 2021.

US: Salt River Materials subsidiary Phoenix Cement Plant is working with ST Equipment & Technology (STET) on a fly ash separation system at a power plant in Utah. The cement producer previously secured a contract with a power plant in the state for the supply of fly ash to its Clarkdale cement plant in Yavapai county, Arizona. STET is supplying the separation equipment, engineering and commissioning services, and an exclusive technology operating license for Salt River Materials. Operations are schedule to start in mid-2021.

Pozzolan business senior vice president Dale Diulus said "Salt River Materials and STET have been working closely to develop a commercially effective beneficiation process improving the quality of the fly ash." He added "We look forward to many years of fly ash sales into the southwestern US markets."

Thailand: Germany-based Beumer has replaced the belt of a 3.5km raw materials conveying system at TPI Polene’s cement plant. It used a process that allows the new belt to be inserted into the system and the old belt to be pulled out only in one go, instead of exchanging the single belt sections one after other. The supplier says that this resulted in ‘substantial’ time saving for the customer and avoided unplanned system failures.

Beumer originally commissioned the conveying system in 2015. The 2200t/hr system consists of two regenerative belt conveyors with system control, transfer stations and filter systems, as well as foreign material separators. 989m of further belt conveying systems are used to remove the material from the blending bed and to feed the primary hopper of the raw mills complete the system. Installation took 11 months, followed by a three-month commissioning period.

US: The Texas Commission on Environmental Quality has approved a request by Holcim US to use more petcoke at its integrated Midlothian plant. Local health and environmental campaigners had hoped to challenge the decision at a meeting in late March 2021, according to the Fort Worth Star-Telegram newspaper. The changes will enable the company, part of Switzerland-based LafargeHolcim, to more than double the plant’s carbon monoxide (CO) emissions to 7000t/yr. 35 local residents submitted requests for a hearing to query the application. Holcim US was identified from state data as the leading emitter of industrial pollutants in North Texas in 2019.