Displaying items by tag: Order

Italy: Bedeschi has signed a contract to supply a clinker storage system to Cementeria Costantinopoli in Barile. The order includes a type STK P bridge stacker and a type BEL C bridge reclaimer. The storage system consists of: a belt conveyor (15m x 1m); a belt conveyor (60m x 1m); a STK P 25/1000 bridge stacker; and a BEL C 160/21 bridge reclaimer. The system will have a stacking capacity of 100t/hr and a reclaiming capacity of 130t/hr.

Guinea: LafargeHolcim Guinée has ordered a modular grinding plant from China’s CBMI. The deal was signed in late November 2018 and was launched in early December 2018. The project will be based at Dubréka, north of Conakry. For CBMI it is the first modular grinding plant it has officially sold.

Oman: Raysut Cement Company has ordered a waste heat recovery unit from China’s Sinoma. No cost for the deal or an expected timescale has been disclosed. The company says it is the first of its kind in the country. Once completed it is expected to reduce the company’s power costs at its plant by up to 30%.

El Salvador: Guatamala’s Cemento Regional has ordered a Plug&Grind modular grinding unit for a project in El Salvador. The project includes a Plug&Grind Classic, a modular packaging and palletising system, raw material and cement storage halls and silos for bulk dispatching. The new unit is scheduled to be commissioned in the first half of 2019. It will have a production capacity of 12t/hr.

Algeria: Zahana Cement, part of Groupe des Ciments d’Algérie (GICA), has ordered a RL 850/1500 double roller crusher from Italy’s Bedeschi. The contract is on an engineering, procurement and construction (EPC) basis and it includes the supply of the new machine, designed for 500t/hr of marl, the removal of the existing machine and the installation of the new crusher with the revamping of the existing electrical board. Commissioning is expected by mid-2018.

Nepal: Germany’s Gebr. Pfeiffer has received an order via KHD to supply an MPS 225 BK vertical mill to grind coal for Samrat Cement. The cement company is building a new integrated production line at a plant in the Dang region.

The mill, with a drive power of 370kW, will grind 35t/hr of coal to a product fineness of 15% R 90µm. At the same time, the coal, which may have a feed moisture of up to 10%, is dried in the mill. An SLS 1800 BK integrated classifier will separate the ground coal into fine product and coarse product, with the latter being returned to the grinding zone to be again. The classifier will also allow petroleum coke to be separated to fineness degrees of <1% R 90µm.

The order was received via Gebr. Pfeiffer’s subsidiary in India. It will supply the main equipment for the mill and associated equipment for the grinding plant.

Germany: KHD has been awarded a contract to upgrade Thomas Zement’s grinding plant in Erwitte. The engineering, procurement and construction (EPC) contract includes process, mechanical, electrical and civil engineering services.
Mechanical and electrical equipment supply includes a roller press for raw material grinding, a static v-separator, an SKS dynamic separator and a KHD HKF process fan.

The deal also includes structural steel supply, erection and installation services for mechanical and electrical equipment as well as structural steel and supervision services for erection, installation and commissioning. KHD is also responsible for the tie-in of the new equipment to the existing raw material and product transport, as well as gas handling and treatment systems.

The erection and installation of the new grinding plant will be carried out during operation of the production line followed by a minimal possible switch over period. No value for the deal has been disclosed.

China: Guangdong Tapai has ordered two coal mills from Germany’s Loesche for its two 10,000t/day clinker production lines in Jiaoling, Meizhou in Guangdong. This is a repeat order, following an order for two LM 35.3 D coal mills that was made in 2015. The 3-roller mill grinds 50t/hr of pulverised coal to a fineness of 3% with a sieving residue of 0.08 mm. The installed power is 1200kW. The order has been placed through Loesche Shanghai and the two newly ordered coal mills are expected to be delivered in April 2019.

China: Lubao Cement has ordered three vertical roller mills from Germany’s Loesche for a new 4500t/day plant that is being built at Bei Liu in Guang Xi. The project is being handled by Sinoma (Suzhou) Construction, part of Sinoma International Engineering and China National Building Material Group (CNBM) in turn.

Loesche is supplying three mills for the project, one each for raw material, coal and clinker/slag. One four-roller mill with a capacity of 450t/hr will be used for grinding cement raw material to a fineness of 12% with a sieving residue of R 80μm. Another mill with a throughput of 200t/hr will be used for the subsequent grinding of cement clinker to a fineness of 3400 - 3600 Blaine. A large three-roller mill with a capacity of 42t/hr will be used for grinding fuel coal to a fineness of 2% and a sieving residue of R 80μm.

No value for the order has been disclosed.

Central America: Denmark’s FLSmidth says it is moving ahead with two contracts for cement plants worth over Euro250m following the receipt of the agreed downpayment. One contract is for a new cement plant and the other is for an extension to an existing plant.

The cement plant engineering company has not released many details on the projects. However, both plans will be located in Central America and will supply cement mainly to their local markets. The expected commissioning is within 24 to 36 months and once operational, the cement plants will have a capacity of 2000t/day and 3500t/day respectively.