Global Cement News

Australia: Boral will receive US$15.4m in government funding for a kiln feed optimisation project at its Berrima Cement Works, with CO₂ emissions expected to reduce by up to 100,000t/yr, based on predicted production rates. The Powering the Regions grant will support the producer’s installation of a new specialised grinding circuit and supporting infrastructure, which will raise the use of alternative raw materials in kiln feed to 23% from 9%, lowering the amount of limestone used.

Boral will use steel manufacturing by-products and industrial waste, including granulated blast furnace slag, steel slag, cement fibre board, fly ash and recycled fine concrete aggregates. The project will be operational in 2028.

The head of innovation and sustainability at Boral, Ali Nezhad, said “In terms of the resulting emissions intensity of the manufactured clinker, the project will result in up to 11% reduction in clinker emission intensity, 9% attributable to a reduction in calcination emissions and 2% attributable to thermal efficiency gains.”

China: NovaAlgoma Cement Carriers has confirmed an order for a 38,000t methanol dual-fuel pneumatic cement carrier by Zhejiang Xinle Shipbuilding, for delivery in 2027.

The vessel will be chartered under a long-term contract by Holcim. Other features include an air lubricating system and a waste heat recovery system, which will recycle exhaust gases to generate electricity.

“By increasing the quantity intake and burning green methanol, the CO₂ emissions on these shipments will be reduced by more than 60% per year in comparison to current freight flows, ie 0.18Mt of CO₂ reduction over a period of 10 years,” NovaAlgoma said.

India: UltraTech Cement has commissioned a 3.35Mt/yr brownfield clinker line and one of two 2.7Mt/yr cement mills at its Maihar unit in Madhya Pradesh. The second grinding mill will be commissioned in the first quarter of the 2026 financial year. The producer also commissioned brownfield expansions at its Dhule grinding unit in Maharashtra (1.2Mt/yr) and Durgapur grinding unit in West Bengal (0.6Mt/yr), and launched its first bulk terminal in Lucknow, Uttar Pradesh, with a handling capacity of 1.8Mt/yr.

“Consequent to the above, the company’s total domestic grey cement manufacturing capacity stands at 183.36Mt/yr. Along with its overseas capacity of 5.4Mt/yr, the company’s global capacity stands at 188.76Mt/yr,” UltraTech Cement said.

Azerbaijan: Cement production rose by 6% year-on-year to 0.58Mt the first two months of 2025, up from 0.55Mt in the previous corresponding period. Cement clinker output increased by 11% to 0.61Mt from 0.55Mt in the same period of 2024, according to the State Statistical Committee.

The State Customs Committee reported exports of 0.14Mt of cement and clinker at a value of US$9.1m. This represents an increase of 32,000t (29%) by volume and US$2.7m (43%) by value compared to the same period in the previous year.

Europe/US: Titan Cement has reported sales of €2.64bn in 2024, up by 4% year-on-year, with growth across all product lines and regions, led by the US and Europe. The group recorded earnings before interest, taxation, depreciation and amortisation (EBITDA) of €592m, up by 10%, with gains from operating efficiencies, lower solid fuel costs and increased alternative fuel use. Net profit after tax stood at €315.3m. In February 2025, Titan completed the IPO of Titan America on the New York Stock Exchange, raising US$393m.

Sales in the fourth quarter grew by 1% year-on-year to €660m, with net profit after tax at €77.5m. Titan said it is on track to digitalise 100% of its plants by 2026.