Displaying items by tag: cyclones

Romania: Holcim Romania has successfully upgraded pyroprocessing and cement grinding equipment at its Câmpulung cement plant in Argeș County. Germany-based KHD Humboldt Wedag supplied equipment for the upgrade. For the plant’s pyroprocessing line, this included a downcomer duct, water injection system and induced draught fan, as well as an upgrade to the clinker cooler. Meanwhile, the grinding line has received a new SKS Z 2500 dynamic separator, cyclones, process ducts and separator fan. The supplier says that the upgrade has increased the Câmpulung plant’s clinker capacity and the efficiency of its operations. The work took 14 months to complete from the signing of the contract in mid-2023.

France: Heidelberg Materials' subsidiary Ciments Calcia has laid the foundation stone for its construction of a Euro285m CO₂ emissions-reducing upgrade to its Airvault cement plant in Nouvelle-Aquitaine. Ciments Calcia first published its plans for the installation of a new 4000t/day production line to replace both existing lines at the Airvault plant in 2021, with commissioning scheduled for mid-2024.

Germany-based ThyssenKrupp secured the order to supply a 1200t/hr double-shaft hammer crusher, a longitudinal blending bed, a 370t/hr Quadropol QMR² 45/23 vertical roller mill, a 10,000t raw materials tangential blending silo, a single-string, five-stage Dopol cyclone preheater with integral calciner for alternative fuels (with the possibility of conversion to oxyfuel), a Polytrack clinker cooler, a solid recovered fuel preparation line and dedusting systems for the project.

South Korea: Ssangyong Cement has ordered equipment from Germany-based KHD Humboldt Wedag as part of an upgrade to clinker production line five of the Donghae plant. The scope of supply for the contract includes: a Pyroclon R type calciner with Pyrotop mixing chamber; a Pyrorotor type alternative fuel combustion reactor; a Pyrobox type coal firing system for process start-up and operation balancing; replacement of stage four cyclones with new high-efficiency cyclones for calciner connection and an overall pressure drop reduction; a new kiln inlet chamber with orifice, kiln hood and tertiary air ducts; and a new Pyrofloor PFC 738AW type cooler with a Pyrocrusher PRC 420-4ES.

This project will be the fourth Pyrorotor installation at the Donghae plant. KHD’s scope includes the engineering and supply of mechanical equipment for the clinker production as well as electrical equipment for the overall modernisation of the production process. The project scope is the same as the modernisation contract of line four of Donghae plant, which was signed in February 2021 and currently is in commissioning. The commissioning of the modernised line five is scheduled for the fourth quarter of 2023.

South Korea: Halla Cement has awarded a supply and engineering contract to Germany-based KHD Humboldt Wedag for an upgrade of line 2 at Okke plant. KHD will supply a new Pyroclon R type calciner, with a Pyrotop type mixing chamber, and a 4.2m x 15m Pyrorotor type combustion reactor. Other equipment being provided includes: a Pyrobox type coal firing system for process start-up and operation balancing; replacement of stage five cyclones with new high-efficiency cyclones; and a new kiln inlet chamber with orifice. Erection and commissioning of the modernised production line is scheduled for the first quarter of 2024.

This latest project marks the second installation of a Pyrorotor at Halla Cement’s Okke plant. The installation of line 3 at the site is currently ongoing with commissioning scheduled for the first quarter of 2023. Overall, this will be KHD’s ninth installation of a Pyrorotor in South Korea.

The Pyrorotor has been promoted to cement plants as a way of using low-quality alternative fuels with minimal pre-processing. It offers a thermal substitution rate of over 85% and will also allow the Okke plant to reduce its NO_x emissions. The installation of the new Pyroclon R type calciner and the high-efficiency cyclones in the lowest preheater stages will also provide the production line with an increase in efficiency due to an overall pressure drop reduction in the entire preheater.

Mexico: GCC has signed an engineering, procurement and construction (EPC) contract with ThyssenKrupp Polysius for an upgrade to its integrated Samalayuca plant to increase clinker production capacity, raise the usage of alternative fuels and reduce emissions. The project includes the engineering, supply and modification of the preheater, including cyclones, and an extension to the calciner, with the installation of a Prepol SC-S type system to increase the utilisation of alternative fuels. The work also includes fitting a Polytrack type clinker cooler and the installation of a bypass system. The project will begin in 2022 with operations scheduled to start in the second quarter of 2023.

France: Germany-based ThyssenKrupp has won a contract for the installation of a new 4000t/day clinker line at Ciments Calcia’s Airvault cement plant in Poitou-Charentes. The supplier expects the new line to double the plant’s clinker capacity while also reducing its CO2 emissions. It is intended to replace the two existing lines at the site.

ThyssenKrupp will supply a 1200t/hr double-shaft hammer crusher, a longitudinal blending bed, a 370t/hr Quadropol QMR² 45/23 type vertical roller mill and a 10,000t tangential blending silo to process raw materials for the line. A single-string, five-stage Dopol type cyclone preheater with integral calciner will be supplied that is suitable to use with alternative fuels, with the possibility of conversion to oxyfuel in future. ThyssenKrupp plans to preassemble the preheater, reducing anticipated construction time ‘by several months.’ The plant also includes a Polytrack clinker cooler, a solid recovered fuel (SRF) preparation line and dedusting systems. Commissioning is scheduled for mid-2024.

No value for the project has been disclosed by Ciments Calcia or ThyssenKrupp. However, Ciments Calcia previously announced a proposed investment of Euro300m in January 2021.

Uzbekistan: The State Committee on Ecology and Environmental Protection (SCEEP) has suspended operations at SingLida’s 0.1Mt/yr integrated Ahtachi plant in Andijan region. Trend News has reported that, following an audit of clinker production between 12 February 2019 and 21 February 2019, the cyclones had failed to meet lawful standards of dust collection. Rates varied between 53% and 61% dust collection, compared to a design capacity of 100%. The government body said that it had given ‘instructions for prompt elimination of deficiencies and reduction of pollutant emissions into the air,’ and has suspended operations of the clinker line and mill until such a time as the problem is resolved.