
Global Cement News
Search Cement News
Nepal starts building dry port at Chobar 18 January 2019
Nepal: Prime Minister KP Sharma Oli has laid a foundation stone of a dry port project being built at Chobar near Kathmandu. The port is being built on an 11.77 hectare site allocated by Himal Cement, according to the Xinhua News Agency. The project has a cost of US$13.3m. It is scheduled for completion in mid-2020. Once operational the new dry port is expected to relieve pressure on the Birgunj dry port.
MAN Energy commissions generators at Iraqi cement plant 18 January 2019
Iraq: Germany’s MAN Energy has commissioned six MAN 18V32/40 generator sets for Kairat Al Abar Iraqi’s new cement plant in Samawa. The engines will supply 54MW of electrical energy for the plant. No value for the order has been disclosed.
Sale of Carthage Cement delayed 18 January 2019
Tunisia: Al Karama Holding says that that sale of a 50.5% share in Carthage Cement has been delayed following the latest round of bidding. The latest round of bids was extended to 7 December 2018 from 6 July 2018, according to local media. However, none of the pre-selected bidders were able to submit a qualifying financial offer. Some of the investors have contacted Al Karama Holding to confirm their interest in the purchase subject to certain conditions.
Uganda: The local government has allocated more than 228 hectares of land for the construction of a new cement plant. The land was offered to the Uganda Development Cooperation-UDC and its partners TSAVO Engineers and Savanna Mines in November 2018, according to the Ugandan Independent newspaper. However, the local community has expressed concerns about the project.
US: Conveyor Components Company has released VA and VAX models, a bucket elevator alignment control product, to its product line of conveyor controls and accessories. The VA and VAX are designed to indicate when the head or boot section of a bucket elevator drifts too far out of alignment. They can be used to signal a problem or simply shut down the bucket elevator leg. This control device has a sequential two-pole double-break microswitch rated for 20A at 120VAC, 240VAC or 480VAC. The metal roller is bi-directional, and designed to survive in difficult environments.