Displaying items by tag: wood

Canada: Ash Grove Cement, part of CRH, says it will release the findings of technical studies supporting its plan to burn alternative fuels at its Mississauga cement plant. Ash Grove plans to burn materials such as construction and demolition waste, wood, plastics and rubber.

The company says the initiative will reduce fossil fuel emissions by limiting its current reliance on coal, while also diverting materials from landfill.

Latvia: Stiga RM is investing more than €32m in a new wood-wool cement board plant in Tukums, expected to complete construction by late 2024 and be operational by the end of 2025. Covering 15,000m², the plant will create almost 100 new jobs and focus on high-quality wood products, primarily for export markets in Europe, Scandinavia and North America. The plant has a capacity of 4.5Mm²/yr of acoustic wood-wool cement boards. The company has an agreement with SCM Group for the supply and installation of the production equipment at the plant.

Manager Sandis Fogelmanis said "We are pleased that the construction of the new plant is progressing according to plan and, at some stages, is even ahead of the original schedule."

Canada: Ash Grove Mississauga cement plant has entered a proposal with the Ministry of Environment Conservation and Parks to burn alternative fuels. This includes materials such as construction and demolition materials, paper fibre, wood, plastic and industrial rubber, according to the Insauga newspaper. Local residents have expressed concerns about potential toxicity and environmental impacts due to emissions from the plant entering the atmosphere. The association reportedly objected to a previous application allowing higher emissions levels at the plant. Ash Grove will address these concerns in a public meeting scheduled for 12 September 2024.

Spain: Votorantim Cimentos will construct a solid recovered fuel (SRF) production plant at its subsidiary Cementos Cosmos’ plant in Oural, aiming to produce up to 0.15Mt/yr of alternative fuel, reports Digital Economia newspaper. The facility, spanning 5800m², will utilise non-recyclable industrial byproducts and various discarded materials from the local community such as plastic, paper and wood, to partially fuel the combustion in its cement kilns. The plant, currently in the public exhibition phase, will start production at 60% capacity, producing 85,000t/yr of alternative fuel. Plans include ramping up to full capacity to produce roughly 0.15Mt/yr. The new plant will create 15 jobs.

Votorantim Cimentos has not detailed the investment in the new facility, although the budget presented to the local council amounts to €12m.

New Zealand: Fletcher Building says that its subsidiary Golden Bay cement is waiting to embark on a US$119 – 178m course of capital expenditure (CAPEX) investment. However, the group said that it will first require ‘clarity from the government’ on any upcoming changes to industrial CO2 emissions allocations or border adjustments.

CEO Ross Taylor said “Until we get certainty there, we really can’t pull the cord.” He added “There’s a good pipeline of existing stuff which will really start maturing in two or three years, but there’s another really sizeable pipeline beyond that.”

Fletcher Building invested a total of US$182m across its businesses during the 2023 financial year, which ended in June 2023. The Bay of Plenty Times newspaper has reported that the investments are part of the group’s growth strategy for the four-year period up to the end of the 2027 financial year. Planned areas for investments include adding value to the group’s wood products by developing its alternative fuel (AF) capacity. The growth strategy has a budget of US$474m.

Brazil: Secil Supremo Cimentos has appointed FLSmidth to carry out a pyro process upgrade at its Adrianópolis cement plant in Paraná. The Denmark-based supplier says that it plans to carry out modifications on the plant's preheater, cooler and related auxiliary equipment. It says the new equipment will expand the plant's capacity to 3900t/day, corresponding to an annual production capacity of 1.42Mt/yr. It will also enable it to increase its alternative fuel (AF) substitution rate to 40%. Secil Supremo Cimentos' AF mix consists of shredded tyres, wood and other refuse-derived fuels.

FLSmidth's head of capital sales, Jens Jonas Skov Larsen, said “We are grateful for our continued partnership with Supremo, which has consistently invested in the latest technology. As the plant was already operating an ILC five-stage preheater from FLSmidth, it was well positioned to use AF.”

In Australia and New Zealand, four producers operate a total of six integrated cement plants, with another 13 grinding plants situated in Australia. This relatively small regional cement industry has been on a decades-long trajectory towards ever-greater sustainability – hastened by some notable developments in recent weeks.

Oceania is among the regions most exposed to the impacts of climate change. In Australia, which ranked 16th on the GermanWatch Global Climate Risk Index 2021, destructive changes are already playing out in diverse ways.¹ Boral reported 'significant disruption' to its operations in New South Wales and southeast Queensland due to wet weather earlier in 2022. This time, the operational impact was US$17.1m; in future, such events are expected to come more often and at a higher cost.

Both the Australian cement industry and the sole New Zealand cement producer, Golden Bay Cement, have strategies aimed at restricting climate change to below the 2° scenario. Golden Bay Cement, which reduced its total CO₂ emissions by 12% over the four-year period between its 2018 and 2022 financial years, aims to achieve a 30% reduction by 2030 from the same baseline. The Australian Cement Industry Federation (CIF)'s 2050 net zero cement and concrete production roadmap consists of the following pathways: alternative cements – 7%; green hydrogen and alternative fuels substitution – 6%; carbon capture – 33%; renewable energy, transport and construction innovations – 35% and alternative concretes – 13%, with the remaining 6% accounted for by the recarbonation of set concrete.

Australia produces 5.2Mt/yr of clinker, with specific CO₂ emissions of 791kg/t of clinker, 4% below the global average of 824kg/t.² Calcination generates 55% of cement’s CO₂ emissions in the country, and fuel combustion 26%. Of the remainder, electricity (comprising 21% renewables) accounted for 12%, and distribution 7%. Australian cement production has a clinker factor of 84%, which the industry aims to reduce to 70% by 2030 and 60% by 2050. In New Zealand, Golden Bay Cement's main cement, EverSure general-purpose cement, generates CO₂ at 732kg/t of product.³ It has a clinker factor of 91%, and also contains 4% gypsum and 5% added limestone.

Alternative raw materials

Currently, Australian cement grinding mills process 3.3Mt/yr of fly ash and ground granulated blast furnace slag (GGBFS). In Southern Australia, Hallett Group plans to commission its upcoming US$13.4m Port Augusta slag cement grinding plant in 2023. The plant will use local GGBFS from refineries in nearby Port Pirie and Whyalla, and fly ash from the site of the former Port Augusta power plant, as well as being 100% renewably powered. Upon commissioning, the facility will eliminate regional CO₂ emissions of 300,000t/yr, subsequently rising to 1Mt/yr following planned expansions. Elsewhere, an Australian importer holds an exclusive licencing agreement for UK-based Innovative Ash Solutions' novel air pollution control residue (APCR)-based supplementary cementitious material, an alternative to pulverised fly ash (PFA), while Australian Graphene producer First Graphene is involved in a UK project to develop reduced-CO₂ graphene-enhanced cement.

Golden Bay Cement is investigating the introduction of New Zealand's abundant volcanic ash in its cement production.

Fuels and more

Alternative fuel (AF) substitution in Australian cement production surpassed 18% in 2020, and is set to rise to 30% by 2030 and 50% by 2050, or 60% including 10% green hydrogen. In its recent report on Australian cement industry decarbonisation, the German Cement Works Association (VDZ) noted the difficulty that Australia's cement plants face in competing against landfill sites for waste streams. It described current policy as inadequate to incentivise AF use.

Cement producer Adbri is among eight members of an all-Australian consortium currently building a green hydrogen plant at AGL Energy’s Torrens Island gas-fired power plant in South Australia.

Across the Tasman Sea, Golden Bay Cement expects to attain a 60% AF substitution rate through on-going developments in its use of waste tyres and construction wood waste at its Portland cement plant in Northland. The producer will launch its new EcoSure reduced-CO₂ (699kg/t) general-purpose cement in November 2022. In developing EcoSure cement, it co-processed 80,000t of waste, including 3m waste tyres. The company says that this has helped in its efforts to manage its costs amid high coal prices.

Carbon capture

As the largest single contributor in Australia's cement decarbonisation pathway, carbon capture is now beginning to realise its potential. Boral and carbon capture specialist Calix are due to complete a feasibility study for a commercial-scale carbon capture pilot at the Berrima, New South Wales, cement plant in June 2023.

At Cement Australia's Gladstone, Queensland, cement plant, carbon capture is set to combine with green hydrocarbon production in a US$150m circular carbon methanol production facility supplied by Mitsubishi Gas Chemical Company. From its commissioning in mid-2028, the installation will use the Gladstone plant's captured CO₂ emissions and locally sourced green hydrogen to produce 100,000t/yr of methanol.

More Australian cement plant carbon capture installations may be in the offing. Heidelberg Materials, joint parent company of Cement Australia, obtained an indefinite global licence to Calix's LEILAC technology on 28 October 2022. The Germany-based group said that the method offers effective capture with minimal operational impact.

Cement Australia said “The Gladstone region is the ideal location for growing a diverse green hydrogen sector, with abundant renewable energy sources, existing infrastructure, including port facilities, and a highly skilled workforce." It added "The green hydrogen economy is a priority for the Queensland government under the Queensland Hydrogen Industry Strategy.”

Logistics

Australian and New Zealand cement facilities' remoteness makes logistics an important area of CO₂ emissions reduction. In Australia, cement production uses a 60:40 mix of Australian and imported clinker, while imported cement accounts for 5 – 10% of local cement sales of 11.7Mt/yr.

Fremantle Ports recently broke ground on construction of its US$35.1m Kwinana, Western Australia, clinker terminal. It will supply clinker to grinding plants in the state from its commissioning in 2024. Besides increasing the speed and safety of cement production, the state government said that the facility presents 'very significant environmental benefits.'

Conclusion

Antipodean cement production is undergoing a sustainability transformation, characterised by international collaboration and alliances across industries. The current structure of industrial and energy policy makes it an uphill journey, but for Australia and New Zealand's innovating cement industries, clear goals are in sight and ever nearer within reach.

References

1. Eckstein, Künzel and Schäfer, 'Global Climate Risk Index 2021,' 25 January 2021, https://www.germanwatch.org/en/19777

2. VDZ, 'Decarbonisation Pathways for the Australian Cement and Concrete Sector,' November 2021, https://cement.org.au/wp-content/uploads/2021/11/Full_Report_Decarbonisation_Pathways_web_single_page.pdf

3. Golden Bay Cement, 'Environmental Product Declaration,' 12 May 2019, https://www.goldenbay.co.nz/assets/Uploads/d310c4f72a/GoldenBayCement_EPD_2019_HighRes.pdf

New Zealand: Fletcher Building subsidiary Golden Bay Cement has co-processed 80,000t of waste in production of its EcoSure reduced-CO₂ general-purpose cement at its Golden Bay, Whangarei, cement plant. The plant has achieved a coal substitution rate of 50%. It has processed various waste streams, including 3 million used tyres. EcoSure cement generates CO₂ emissions of 699kg/t of product, 20% less than its imported alternatives, according to Golden Bay Cement. Fletcher building CEO Nick Traber said that this figure is 'simply our starting point.' The company's next target is to achieve a 30% CO₂ reduction by 2030.

Traber said "We needed to think outside the box, or rather the cement bag to be more precise. The challenge was around what enhancements we could make to our manufacturing processes at our Golden Bay cement works in order to improve the plant's sustainability. We quickly realised that consuming used tyres and wood waste as alternative fuels was a win-win. When we started with the idea in 2015, we were aiming to replace 15% of coal with end-of-life tyres. Fast forward to 2022, and our rate of coal substitution is now at 50%, which has obviously delivered further reductions in carbon emissions, as well as helping to offset increased coal costs."

France: Holcim France has announced its successful industrial-scale production of the world's first 100% recycled clinker. The La Tribune newspaper has reported that the company's Altkirch, Alsace, cement plant produced the clinker. Holcim France chief executive officer Francois Petry said that the plant's team collaborated with researchers at the Holcim Innovation Center to develop a recipe that incorporated multiple waste streams, including mineral wastes and wood ash. The producer says that most of the waste materials were locally sourced.

Denmark: Cement and wood-based acoustic board producer Troldtekt has agreed to a takeover offer from Ireland-based Kingspan Insulation. The producer uses ordinary Portland cement (OPC) produced ‘from Danish mineral resources’ along with shredded Norway spruce to produce its boards.

Kingspan Insulation managing director Alan Lawlor said "I am delighted to welcome Troldtekt to the Kingspan family. As the global leader in high-performance insulation and building envelope solutions, we have the capacity to help them expand beyond their core markets, whilst bringing acoustic and decorative boards and natural insulation materials into our portfolio. Troldtekt has been able to continuously innovate and it sets the bar impressively high in the field of the circular economy.” He concluded "We will invest significantly in the company's production facilities to set them up for geographic growth."