Displaying items by tag: carbon capture, utilisation & storage
Titan Cement Group earns Climate A rating
07 February 2024Greece: Titan Cement Group has appeared on carbon disclosure organisation CDP's A List for corporate transparency and climate impact mitigation. The company achieved an A- for water security. Titan Cement Group says that the recognition aligns with its 2026 Green Growth strategy.
Titan Cement Group reduced its CO2 emissions by 10% between 2020 and 2023. In 2023, it commenced construction of the 1.9Mt/yr IFESTOS carbon capture and storage project.
Carbon capture for the US cement sector, January 2024
24 January 2024It has been a busy week for carbon capture in the cement sector with Global Cement covering five stories. However, increasingly, the topic has become a regular feature in the press as the industry bends to the demands of the carbon agenda. This week’s selection is notable because three of the stories cover North America.
Holcim US announced that it is working with Ohio State University and GTI Energy to design, build and test engineering-scale membrane carbon capture technology at the Holly Hill cement plant in South Carolina. The information builds on an earlier release from the US Department of Energy’s (DOE) Office of Fossil Energy and Carbon Management (FECM) in late December 2023 about the project. It has a total budget of US$9m, with US$7m supplied by the DOE. It plans to build a 3t/day CO2 capture unit that uses a method intended to retain 95 - 99% of CO2 from cement kiln gas with a purity exceeding 95%. The new information at this stage is that GTI Energy is involved. Specifically, it will support the development of the pilot skid for site deployment.
The other two stories from North America are worth noting because they both concern commercial equipment or technology suppliers joining up to work together. First, 10 companies - Biomason, Blue Planet Systems, Brimstone, CarbonBuilt, Chement, Fortera, Minus Materials, Queens Carbon, Sublime Systems, and Terra CO2 - announced they were launching the Decarbonized Cement and Concrete Alliance (DC2). The group’s principal aim is to lobby the US government toward using new low-carbon cement and concrete products in public infrastructure. It also intends to look at advocacy and public sector engagement including expanded tax credits, development of standards for novel cements, consistent ecolabeling and accounting, and customer demand support. DC2 was formally launched in January 2024 but it follows previous work by the companies in the area. The other related story was a memorandum of understanding that Aker Carbon Capture and MAN Energy Solutions have also signed this week to jointly pursue opportunities related to carbon capture, utilisation and storage (CCUS) and CO2 compression in the North American market. These two companies have worked on the full-scale CCUS unit at Norcem’s Brevik cement plant, which is due to be commissioned later in 2024. They are likely intending to capitalise on the publicity that is likely to be generated once it officially starts up.
Back in North America the DC2 Alliance noted in its press release the DOE’s release of its Pathways to Commercial Liftoff: Low-Carbon Cement report in September 2023. Although it is similar to many other varied sector roadmaps, including the Portland Cement Association’s Road to Net Zero that was released in 2021, this document is well worth reading due to its details and local market context. The headline figure, for example, is that following a set of pathways to fully decarbonise the US cement industry would cost US$60 - 120bn by 2050. Doing so would involve reducing the clinker factor, improving energy efficiency, increased use of alternative fuels, using CCUS, using alternative feedstocks and adopting alternatives to traditional cement production methods.
Graph 1: US active cement kilns by capacity and age. Source: PCA survey data used in Department of Energy Pathways to Commercial Liftoff: Low-Carbon Cement report.
One other interesting tidbit to consider from the report is an analysis of the age of the US cement sector’s kilns versus their production capacity as shown in Graph 1 above. The largest 10 kilns in the country account for 22% of the country’s total capacity and these were all built after 2000. Then, the next 44% of the national capacity comes from 38 kilns out of a total of 120 kilns at 98 cement plants. The report itself does not make this assertion but the implication is that retrofitting CCUS units at one third of the country’s clinker lines would capture the CO2 being emitted from two-thirds of the sector’s production capacity. This is not to say that this could actually work technically, logistically or economically. Yet seeing the scale of the challenge presented in this way is fascinating and one starts to have thoughts about how a retrofit roll-out of CCUS units might actually be approached.
Whether the cement sector adopts CCUS at scale remains to be seen but demonstration projects are definitely coming in both Europe and North America. The DOE report from September 2023 suggests that decarbonisation will cost a lot of money. No surprises there and, as ever, there is rather less detail on who will actually pay for this. One thing that might help here, that the DOE report mentions frequently, is the 45Q carbon capture tax credit scheme, which was introduced by the Trump administration in 2020. Regardless of the potential bill for consumers of cement though, the suppliers are clearly taking note of the investment potential as evidenced by all the non-cement plant CCUS news stories this week.
Aker Carbon Capture and MAN Energy Solutions partner for North American CCUS deployment
23 January 2024North America: Aker Carbon Capture and MAN Energy Solutions have signed a Memorandum of Understanding (MoU) to explore carbon capture, utilisation and storage (CCUS) and CO2 compression opportunities in North America. The collaboration will combine Aker Carbon Capture's amine capture technology with MAN Energy Solutions’ compressor technology to provide standardised and modularised solutions, with optimised energy consumption and delivery time. Both parties are currently participating in the Brevik capture and storage project with Heidelberg Materials Northern Europe in Norway. Rystad Energy has forecast potential capture capacity across North American industries of 200Mt/yr by 2030.
Aker Carbon Capture head of North America Jonah Margulis said "This agreement will strengthen our position to remove and reduce carbon emissions from industries and energy solutions, which is supported by strong incentives from the US government."
MAN Energy Solutions head of sales and project management, carbon capture and storage, Marco Ernst said "We are delighted to work with Aker Carbon Capture, which appreciates our comprehensive expertise in compressor solutions in general and in the area of CO2 compression in particular. We feel encouraged by the high level of interest in our technical solution concepts that we are on the right path towards sustainable decarbonisation of the industries that have previously had particularly high emissions."
Devnya Cement begins building carbon capture system
18 October 2023Bulgaria: Heidelberg Materials subsidiary Devnya Cement has commenced construction of the ANRAV.beta carbon capture pilot unit at its Devnya cement plant near Varna. Construction will take ‘a few months,’ followed by a pilot trial lasting 12 – 24 months. The ANRAV system will rely on OxyCal oxygen-enriched burner technology to eventually capture 800,000t/yr of CO2 from 3Mt/yr of plant flue emissions. The project has Euro190m in grants from the EU Innovation Fund and is scheduled for delivery in 2028.
Heidelberg Materials’ Northern and Eastern Europe-Central Asia regional director Ernest Jelito said “The OxyCal technology we will be trialling in Devnya is a crucial addition to our portfolio of capture technologies. Obtaining solid operational data from industrial pilots like this is essential to ensure the successful implementation of projects under our comprehensive CCUS investment programme. At the same time, we can demonstrate an economically feasible way to decarbonise carbon-intensive industries in Eastern Europe.”
India: A report by the Council on Energy, Environment and Water (CEEW), funded by power provider BP, has estimated that India’s cement and steel sectors will require capital expenditure (CAPEX) investments of US$627bn in order to reach net zero CO2 emissions. The report stated that waste heat recovery (WHR) and other efficiency-enhancing upgrades to cement plants can immediately reduce the industry’s emissions by 32%.
United News of India has reported that CEEW CEO Arunabha Ghosh said "Incentivising renewable energy will play a pivotal role in decarbonisation, through lower or no transmission charges at central and state levels. The government of India should develop a policy for and expedite the establishment of a carbon capture, utilisation and storage ecosystem to abate more than half of the emissions from the existing steel and cement plants.” Ghosh added “Since hydrogen will play a key role in its implementation, the next phase of the National Green Hydrogen Mission should focus on this agenda."
UK: Carbon8 has appointed Paul Drennan-Durose as its chief executive officer (CEO). He succeeds John Pilkington, who becomes the non-executive chair.
Drennan-Durose holds experience in the sustainable energy sector with both public and private companies, including private equity and venture capital. He previously worked as the CEO of Ineo Partners, Powerhouse Energy Group and Heliex Power. Before this he was the managing director of Poole Process Equipment for seven years in the 2010s. Other roles of note include that of Group Commercial Director - Europe, Africa, Middle East and Asia Pacific for SMP Europe and the managing director of PLW and Fiamm Energy Technology.
Carbon8 is a UK-based company that supplies carbon capture, utilisation and storage (CCUS) equipment. Its main investors include EDF Pulse Ventures and Vicat. Notable corporate achievements include deploying its technology at Vicat’s Montalieu-Vercieu cement plant in France, at an EFW plant in the Netherlands and establishing business partnerships with FLSmidth and Return Carbon.
Canada: The Cement Association of Canada (CAC), with its members and partners in the concrete sector, has released Concrete Zero, an action plan to help the local cement and concrete sector reach net-zero CO2 emissions by 2050. The five priority areas it is focusing on include: eliminating the use of coal and petroleum coke as fuel sources for clinker production; reducing the volume of clinker used to produce cement; increasing the use of supplementary cementitious materials; working towards building carbon capture, utilisation and storage capacity; and advocating for performance-based codes, standards and specifications, procurement policies and increased material efficiency in construction. Targets include reaching a 100% fuel mix from non-fossil-based sources by 2050. The latest plant follows the goal of achieving a 40% emissions reduction by 2030 as part of its Roadmap to Net-Zero Carbon Concrete by 2050.
Adam Auer, the president and chief executive officer of CAC, said “Our net-zero action plan is ambitious and cannot be achieved by industry action alone. Working with government, industry, and partners in the design, architecture, and construction industry will be essential for success. Canada’s cement and concrete industry are committed to doing our part to help Canada build a better, cleaner future. Working together, we can deliver Concrete Zero.”
Business and academia attend the Innovandi Global Cement and Concrete Research Network Spring Week in India
26 April 2023India: More than 75 representatives from academic institutions and businesses from across the world are attending the Innovandi Global Cement and Concrete Research Network (GCCRN) Spring Week taking place in New Delhi. The GCCRN has brought together 450 researchers and scientists from more than 40 universities and institutions, including the EPFL in Switzerland, South East University in China, University of Toronto in Canada, the Indian Institute of Technology Delhi, the University of Cape Town, Imperial College London in the UK, as well as 35 cement and concrete manufacturers and their suppliers. The focus of the conference is to work towards reaching net-zero CO2 concrete production, including sourcing and improving alternatives to clinker, work on calcined clays, concrete recycling – plus its carbonation and durability - as well as kiln electrification and carbon capture, usage and storage (CCUS).
Claude Loréa, the Innovation and ESG Director at the Global Cement and Concrete Association (GCCA), said “Global Innovation collaboration and research will help unlock our industry’s decarbonisation mission. Spring Week is the key date in the GCCA’s Innovandi calendar. It provides an opportunity for our partners to meet face-to-face, exchange ideas, run workshops, and measure progress on key research projects in line with our industry’s 2050 Net Zero Roadmap. Our industry and our key partners are stepping up to the challenge and it’s fantastic to see the progress on some of the 75 PhD candidates supported by the GCCRN.”
The event is also updating attendees about progress made by projects involved with the Innovandi Open Challenge. This initiative matches start-ups with GCCA member companies from around the world, to help scale up research and technical innovation. Two of the six start-ups selected in 2022 at the first ever Innovandi Open Challenge, which focused mainly on carbon capture and utilisation, have already gone to pilot stage. Applications for the second challenge, which focuses on low carbon concrete, close on 15 May 2023.
The GCCRN was set up by the GCCA, a lobbying group representing more than 80% of the world’s cement and concrete manufacturers outside of China. All GCCA member companies are committed to decarbonising the industry by the mid-21st Century, in line with the GCCA’s Concrete Future 2050 Net Zero Roadmap.
France: Ciments Calcia has announced an investment of Euro86m to further decarbonise cement production at its integrated Beaucaire plant. The subsidiary of Germany-based Heidelberg Materials has allocated a total of Euro600m towards reducing CO2 emissions from all of its operations in the country in response to a government initiative, according to The Tribune newspaper.
The current funding follows a spend of just under Euro7m on upgrades at the site, including installing a new clinker cooler that will allow for greater recovery of waste heat, and the addition of a new computer control system. Following this work, the single production line plant was restarted in early April 2023.
The next stage of investment has started with a feasibility study. If successful, a tendering process could start in the second half of 2023 with work planned to start in 2025. The company intends to renovate the plant’s electricity network, modernise the production line with a preheater and a pre-crusher and make further changes to target an alternative fuels thermal substitution rate of 75%. A third stage, involving carbon capture and utilisation and/or storage, is tentatively planned to start in 2030.
Japan: Mitsubishi Heavy Industries (MHI) and Osaka Gas have launched a collaboration to develop a value chain for captured CO2 from Japan's hard-to-abate industries, including the cement sector. JCN Newswire has reported that their collaboration will leverage MHI's expertise in CO2 capture, liquefied CO2 maritime vessel transport and CO2 management, and Osaka Gas' expertise in e-methane production and CO2 storage. The project will integrate MHI and IBM Japan's CO2nnex software platform to model value chains. The project aims to contribute to the realisation of Japan's target of net zero CO2 emissions by 2050.